Dam Quick screws

[quang tran]

All Dam Quick use flat screw driver but normally I find It's too thick to fit in slot , using smaller size so it fit but head is too small easy to damage screws . So far I have to grind off the tip to make it fit in slot , what is correct size screw driver to use

[foakes]

A decent set of hollow-ground gunsmithing screwdrivers will cover all your needs.

The exact size screwdriver is needed so as to not booger the screw heads.

A good handle also is helpful for removing screws that were last tightened 50 years ago.

Best,

Fred

[quang tran]

Thanks Foakes , I will order a set . These screw drivers are expensive

[reelynew]

Hey Quang,

I have been using this set from Wheeler and have had no complaints.  I bought it originally to work on firearms, but I have been using it more so now for reels. Wheeler also has a newer set out now.

Matt

[quang tran]

Thank you but I already order this
https://www.ebay.com/itm/156244712711?itmmeta=01J056EDWF0M8B2MAM12TTQSHM&hash=item2460e91d07:g:KqEAAOSw20BmX9kI&itmprp=enc%3AAQAJAAAA8BrzChaVhzl%2BgrOwQdIhaIxthC3MhBPbKzPr%2FKyCcKO6G07lfZ2zY0pMr66c1kdd1uIVLecO9rKI3paMja6MDvc1HkKmbyuZd8eHQ3c3uiP00hb4KLsXlunmDyK%2FRw4i25SJ40UoIND6Bf3b8c%2Fjd%2B2YCH5IAAgyRICsbTblIa4jqIkBO62m7MCtQnPN82NvbPdZ2w%2BzTmpNGCgFnQ8tE4sYO6jUE%2FkLVNeTJiwqoZh%2Bfl400lSgKq%2FwCkYECmrPsaJbvOaDj4zn%2F02H%2F40jsDlUTZTVrrUAG%2FTiiJ78ibYwWRunc9wOmFs%2B3tKckx0TXQ%3D%3D%7Ctkp%3ABFBMqt65poFk
For the same price but here the less is more to me

[Brewcrafter]

That set you have looks like it will do the job.  Grizzley Industrial had a nice affordable set about a year ago that several of us took advantage of, but it looks like it is no longer available.  The proper sized tips will make quite a difference; I think you will be pleased with them. - john

[reelynew]

Looking forward to hearing how this set works out for you.