NEW DAIWA 600H 5+1 ULTIMATE UPGRADE ON THE WAY!

[tenderloin]

After finding some of Bryan's 600H parts, we are bringing back his Daiwa 600H 5+1 Ultimate Upgrade Kit. We have made a few changes but what hasn't changed is Bryan's insistence on Made in USA quality and great customer service. We still use the same metal manufacturing company and Bryan's specified stainless steel. We continue using the finest drag washers... Smooth Drag Carbontex from Dawn as well as Penn HT-100 drag washers from Mystic!

The main gear has some challenges as the inner grooves do not go down to the bottom of the main gear. We made a custom SS washer combined with a Penn HT-100 washer to make sure there is more than enough room to insure full drag use. No more grinding, shaving, trimming etc. It is already done! If there are older reels with an inside main gear lip we will ship a modified washer to fit. Please let us know in advance if you need the modified drag washer. The only part of the stock drag stack that needs to be reused is the very thick top of drag stack keyed metal washer Daiwa part# 376-2601 shown on the bottom row far right..

These kits will be available through Mystic Parts within two weeks.

Thank you

Kit includes
1 Ultimate Upgrade Thick SS Keyed Washer
1 Ultimate Upgrade SS Keyed Washers
2 Ultimate Upgrade SS Eared Washers
1 Penn HT-100 Main Gear Washer
4 Carbontex Main Gear Washers
1 Modified Penn HT-100 Under Main Gear Washer