sl 450h

Started by taytin, June 20, 2009, 10:28:46 AM

Previous topic - Next topic

Maxed Out, quang tran, Tile, slosh, Robbydiers, Wally15, jgp12000, wfjord, the rockfish ninja, alantani, whalebreath, Marlinmate, drumbum, Gfish, mbg60, bja105, funhog, tincanary, akroper, Smols, denhambruce, broadway, natch! and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

taytin

June 20, 2009, 10:28:46 AM
hey alan i got a 450h one of the screws on the side plate has been snapped off and the scew it still in the frame i know the screw is there for a reason but will it affect the reel if iuse it with one less side plate screw the position of the screw is left 9 o clock any anvice would be appreciated

alantani

#1
June 22, 2009, 06:36:23 AM
no, you should be fine.  no way to remove it?   
send me an email at alantani@yahoo.com for questions!

taytin

#2
June 22, 2009, 08:41:54 AM
yeah i was using a extractor bit with my drill it took me a while i got most of the stuff out then when i was at the last piece the bit got stuck and snapped in the hole i was extracting thats when i decided that its not coming out and came online ill use it and see what happens but if you think that it will work properly i wont go get another frame
Print
Go Up Pages1
User actions