I guess this is as good a place any to start this topic. I recently acquired one Penn 20/0 kits made by Tiburon. For my build out I wanted to use a 16/0 counterbalanced crank arm to give it a retro look. I found the one pictured attached to and old, dirty 16:0 Senator. As you can see there is some loss of chrome and the handle is missing. My question is twofold:
1 - where can I get it rechromed?
2 - who could make or fit a custom handle to the post?
......hmmmmm
You do realize that Penn never made a cb handle for 14/0 or 16/0 right ?? Penn employees did make some unique parts for personal use. That would be my guess for why this one fits a 16/0
If this came off of a 16/0 I would like to see pic of the donor reel if that's possible
Ted
You are correct Ted, Penn never made those for the 14/0 and 16/0. But, somehow I've personally run into a half dozen that where listed for the 16/0 and did fit on the 16/0, not sure if it was a custom job or if they were for the 10/0's and were enlarged :-\
I do not have those any longer I sold them all roughly 10 years ago, I believe Mike Cacioppo was one of the buyers at that time.
Sal
Gentlemen thank you for the reply. I had never seen a cb handle on a 16 or 14 but found this reel with it attached. This reel belonged to Albert Munger the author of several articles and books on reel collecting. This was his go to reel for big tuna. It is mounted on a section of bent pipe that while a little crude would be effective. His daughter graciously agreed to sell me the reel when I explained to her that parts of it would live on in the 20/0 project and I would make note of this contribution in my notes, posts or articles about the reel. As you can see by enlarging the photos the fit is factory perfect with or with the retaining screw. I'm really hoping I can salvage this piece and use it on the build. Best, Mike
My 14/0 is an old one and came with the counterbalanced handle. It was stock and not filed out from a 12/0. Will post a pick later.
Here's a pic of the reel mounted on the pipe/ butt. The end is slotted to fit onto a gimbal cup brace. The other end is threaded for what I assume was a ferrule nut.
Didn't early 14 and 16/0's have a smaller sleeve?
This would explain the fitment.
I believe this is definitely an earlier reel. There are no part numbers visible on any external pieces. According to Mike C's book the only significant change to the 16/0 was in its 50+ year run was moving the bridge assembly to the 7 o'clock position.
It does look more like a 12/0 blade
The blade itself kinda looks too short for the 16/0
Ted, you could be right. I have a first year production 12/0 with a CB handle. It measures 6 1/4" inch long. The handle on the 16/0 measures the same.
While I would love to see it be the first, i don't believe it is. It's a 12/0 handle. I have had that happen twice to me. I believe ted set me straight on at least one of the two and he was spot on. I did see that 16/0 listed and was hoping someone from here bought it. No numbers and the condition being rough I still wouldn't use that as a donor... it needs a donor for itself potentially. Not only is it Al Mungers old reel (significant to reel collectors) but 14/0's without numbers are a fairly tough find. If you are lucky enough to stumble upon a first gen it would make a heck of a donor.
Whatever you do with it, enjoy it!
Thanks
Dom
And there you have it Mike. ;)
Well, back to the drawing board. Anyone want the 16/0?
I want to take a good look at that reel when I see you again.
I'm in the UP right now. I'll be back possibly Saturday. I'll let you know brother and maybe we can get together at my house or yours on Sunday. If not this weekend I'm around all next weekend. Be good to catch up.
If you're in the UP than you have some nice weather but wow, what a cool morning. I'm 10 miles from the mackinaw Bridge visiting Mom and it was 47 this morning.
Enjoy your trip,
Dom
Yes sir! This is truly a sportsman's paradise. It felt good to be chilly last night after being in 100 degree Kentucky heat and humidity. We're here for wedding but hoping to get in a little Fly fishing too. Be safe Brother and enjoy the time with your mom. Are you in Leland?
Thanks Mike! I know what you mean about how good the cool dry air feels because it's been a bear in NYC also. I'm in Petoskey MI and a little north of there. We aren't "fishing" this trip (sadly) but hope to get a bluegill or two on the line at the local pond.
Have a great trip and a successful fishing trip.
Enjoy bro
Dom
Quote from: The Great Maudu on July 16, 2018, 05:38:54 PM
I believe this is definitely an earlier reel. There are no part numbers visible on any external pieces. According to Mike C's book the only significant change to the 16/0 was in its 50+ year run was moving the bridge assembly to the 7 o'clock position.
Mike they changed the drags on the early 16/0s and 14/0s from the early small "same size as 12/0s to bigger set ups in around 1942/43 or there abouts !! Brian "Oceanreels" know dates better than me. John Taylor
Guess I should have read whole thread before responding !! Mike C. beat me Lol !!! John Taylor
Always good to hear from you anyway my friend. Maybe we can hook up sometime somewhere and fish the monsters.
Quote from: The Great Maudu on July 18, 2018, 10:25:32 PM
Always good to hear from you anyway my friend. Maybe we can hook up sometime somewhere and fish the monsters.
PEI next fall you welcome to come !!! John
Sounds good to me. The only obstacle would be a conflict with a hunting trip or a karate tournament. Fall is always packed. I'm assuming PEI is Prince Edward Island. Do you fly there or boat?