Hi to All ,
I have searched as well as I can, and nowhere can I find a picture, tutorial, or instructions on how to remove the strike alert button from right side plate on a penn international reel.I have a 50TW stripped down but don't want to force anything apart. It seems to be in there VERY tight.
Also, could someone explain the procedure for searching any subject. I type in simple requests (''Penn strike alert button'' for example ) and get no results 90% of the time. I am definitely doing something wrong.
Thanks for any help on either subject.
Greg
Try "clicker".
Which International model? Dominick
Not sure if this will help you:
https://www.mysticparts.com/Assets/images/pennparts/schematics/50tw.pdf (https://www.mysticparts.com/Assets/images/pennparts/schematics/50tw.pdf)
And this should be similar:
http://alantani.com/index.php?topic=630.msg1522#msg1522 (http://alantani.com/index.php?topic=630.msg1522#msg1522)
"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Remove the locking hardware inside the plate and knock the old assembly out. Replace with a new assembly.
Quote from: Navidad Nutcase on November 12, 2018, 10:16:57 PM
Hi to All ,
I have searched as well as I can, and nowhere can I find a picture, tutorial, or instructions on how to remove the strike alert button from right side plate on a penn international reel.I have a 50TW stripped down but don't want to force anything apart. It seems to be in there VERY tight.
Also, could someone explain the procedure for searching any subject. I type in simple requests (''Penn strike alert button'' for example ) and get no results 90% of the time. I am definitely doing something wrong.
Thanks for any help on either subject.
Greg
Use Google as your search engine:
site:alantani.com Penn+strike+alert+button
Brings back a link to this thread. Use the plus sign to include words, the - sign to exclude words.
I hope that helps.
Rob
Print Page - penn international strike alert button removal - Alan Tani
alantani.com/index.php?action=printpage;topic=26944.0
20 hours ago - Hi to All , I have searched as well as I can, and nowhere can I find a picture, tutorial, or instructions on how to remove the strike alert button from ...
o.k. I got it out. Wasn't that hard to do once I knew the procedure. I was just afraid to HIT IT ! until I new all the things to keep it from coming out were removed. Handi2, you say to replace the assembly. I gather from that - it's not going to help to try and get that little nut off the end of the clicker so I can get inside to clean things up. The spring is shot, I am sure. Or so full of corrosion that it can't ''spring''
And to JoseCuervo, that was slick. I will remember to search that way in the future. "Google the all knowing "
I'm going to toss the hole clicker assembly in some reel clean and go from there. I do not have any spare clicker assemblies. ( well I do, but only if I rob Petere to pay paul. - temporarily )
As always, a great site full of helpful people.
Greg