Hi fellow anglers, I recently encounter a problem when I wanted to open up my ryoga 2018 model. It does seems want to be disassembled. I took out the 2 screw holding the frame but was unable to pull it apart. I believe there is a hidden catch or wat not. So was asking if anyone got any luck in opening their ryoga. Thanks
Pic
Did you undo that screw on the lower left in the photo?
You can find schematics here:
https://www.plat.co.jp/shop/catalog/optionparts/language/en/manufacturers/1/siries/19/ (https://www.plat.co.jp/shop/catalog/optionparts/language/en/manufacturers/1/siries/19/)
Hope this helps.
~
Hi thanks for the reply, I do have the schematic on have but just couldn't figure out how to open it. It's secure by 2 screw one front one back, after taking out both seem to be stuck. Even try using a plastic pry tool to open but just can't get it open.
Daiwas can be tricky sometimes.
You might have a lot better chance of success if you post some pictures showing the screws.
If this is not possible quote part numbers from the schematics.
~