Here is a compilation of just about every bearing and where used for Avet reels.
Avet sells bearing by reel model and not bearing size. So i ordered every bearing for every reel from Avet and measured and compiled this file.If there are any errors please PM me so I can update this.
Jim N.
Mahalo for posting this.
I'd like to thank you for this list. This just helped me out. It's information like this that means this site so valuable.
MXL 6/4 Raptor
P/N Description Dimensions Qty
07 Spool Brg. I.D. .1875 O.D . 3750 W. .1250 2
13 Inner Brake Brg. I.D. .1875 O.D. .5000 W. .1950 1
17 Outer Brake Brg. I.D. .1875 O.D. .3125 W. .1250 1
23 Endhouse Brg. (Pinion) I.D. .2500 O.D. .6250 W. .1950 1
41 Drive Shaft Brg. I.D. .3750 O.D. 6250 W. .1550 2
SX 6/4 Raptor
P/N Description Dimensions Qty
07 Spool Brg. I.D. .1875 O.D . 3750 W. .1250 2
13 Inner Brake Brg. I.D. .1875 O.D. .5000 W. .1950 1
17 Outer Brake Brg. I.D. .1875 O.D. .3125 W. .1250 1
23 Endhouse Brg. (Pinion) I.D. .2500 O.D. .6250 W. .1950 1
41 Drive Shaft Brg. I.D. .3750 O.D. 6250 W. .1550 2
Wow, this is great. we do sell the bearings by model because of the fact that the layman would not know to do this. Never the less, this information is invaluable. Awesome work.
U da man!
Quote from: Avetman on April 12, 2016, 05:20:41 PM
Wow, this is great. we do sell the bearings by model because of the fact that the layman would not know to do this. Never the less, this information is invaluable. Awesome work.
It also allows people to go to places like Boca Bearings to get bearing with different ABEC ratings, if desired.
Tight Lines !
Thanks.. I needed this
Thanks a ton guys!
Any size info for JX Raptor and MXJ Raptor? 🤝
Hi Lads, looking for hepl with a bearing for an LX 6.0.1 ,i have tried repair but noticed with the newer Lx the bearing apperas stainless in colour and slightly bigger than the old blue/silver bearing ,has anyone come accross this ,any link help dimensions would be a great help ,i cant seem to find it on the avet spares site ,thanks..
maybe here. http://smoothdrag.com/price.html
Thanks Alan ,but not sure what size im looking for..
can you pull out the old one and measure it?
To me it sounds like he is talking about the pinion bearing. The spool bearings are the same size, the left side bearing is a bit thinner than the pinion bearing. The blue I bet he is talking about is the rubber shield on the pinion bearing. It's been many years since I removed those shields on my reels and packed them with grease but I think my JX had a black rubber shield on the outer bearing.
I also replaced the pinion bearing with a angular contact bearing, so I can't even open up my reel and have a look.
The largest/fattest bearing in those reels should be the pinion bearing.
https://youtu.be/jABU3-Xw22A (https://youtu.be/jABU3-Xw22A)
Thanks lads ,pulled the bearing ,width 6mil outer diameter 19mil and inner 6mil ,different to the same pinion bearing in my other lx avets 6.01 ,I followed that video and put the beval washers the same as video thats why I had no freespool strange,put them back the way they were and no problem ,just have to order some bearings now...
Hmm, a different bearing that's the first time I have heard of that in any of the LX reels.
I'm glad you got it sorted out. Well done.
Not sure SoCal ,on better measurment the inner diameter is 5.7/8 mm not any easy bearing to source ,but have order the 6x19x6 and will see if it works ,no responce from avet as usual by email ,nothing on there website about new bearings or where to purchase ,and the reel was only used once in September ,every thing else ok..
6x19x6mm SKU:DDR 1960-2RS/BP worked ,no problem at all ,reel puring again...