I have a big bag of HT-100 washers for the 113h. looking to get the thinner metal washers and convert some of my reels to the 5 stack. Do you offer the set of metal washers separately?
Also the for the Jigmaster Bryan! :d
Quote from: Fishead on July 11, 2023, 12:16:02 AMI have a big bag of HT-100 washers for the 113h. looking to get the thinner metal washers and convert some of my reels to the 5 stack. Do you offer the set of metal washers separately?
Mysticparts.com has them
https://www.mysticparts.com/PennParts/Parts/7C-113H.aspx
I would take some of the 5 stack metal only sets for the Jigmaster/Newell as well. It doesn't look like Mystic carries those.
If Brian doesn't have them try Dawn at smooth drag
Quote from: Fishead on July 11, 2023, 12:16:02 AMI have a big bag of HT-100 washers for the 113h. looking to get the thinner metal washers and convert some of my reels to the 5 stack. Do you offer the set of metal washers separately?
do you mean the thinner metal washer of the 5 stack, right?
because Bryan had the ultrathin metal washers along with mix of thin and ultrathin carbon drag washer to make the 7-stack drags, these ultrathin metal washers are hard to find, almost unobtanium by themselves, just on a complete Ultimate upgrade 7-stack kit
Quote from: steelfish on July 11, 2023, 04:37:55 PMalmost unobtanium by themselves
That's funny I have quite a few.
Yes, I was speaking of the 5 stack 113h metal washers. DayOne said Mystic has them which they do. I would like to get some of the 5 stack metal Jigmaster/Newell size as well. Those do not come up on Mystic's site.
Quote from: JasonGotaProblem on July 11, 2023, 05:44:31 PMQuote from: steelfish on July 11, 2023, 04:37:55 PMalmost unobtanium by themselves
That's funny I have quite a few.
they worth their weight in solid gold. ! ;) ;)
But do you want to part with any of them?
Alan said Bryan is on vacation in Hawaii.
Sure he'll reply soon!
Quote from: Fishead on July 12, 2023, 12:46:46 AMBut do you want to part with any of them?
Perhaps. But it'll be if and only if Bryan can't or won't help. I'm not gonna step on his toes. I have so much on my plate right now that it'll likely be a week before I can check anyway.
Nor would I ask you to. I haven't gotten a reply from Brian yet. I'm not in a rush anyway.
@Fishead @JasonGotaProblem This is the first tie I seeing this posting. Sorry. Did you get what you need? I think you were asking for thin metal washers. Is that correct?
Due to my current condition, all of my drag kit supplies have been transferred to Ken Reaber to continue the Ultimate :-* Upgrade line of drag kits.
If you're planning to use the one with HT100 drag washers with my thin metal washers you will not be able to get a seven stack in there. There's just not enough height in the main gear. I use a combination of thin and thick Carbontex from SmoothDrag, each of which are thinner than the HT100 washers.
Hope this helps.
Bryan
I have some if needed. Pm me
Todd