a local guy made a couple of handle arms out of stainless steel for me. the one on top fits the smaller single speed boss accurates and all of the penn reels that use a jigmaster gear sleeve. the one on bottle fits the two speed boss accuates from the 197 to the 870. the 665 needs a hole that is slightly larger. i didn't find that out until later. my mistake.
(http://alantani.com/gallery/1/1_12_07_09_9_36_14_1.jpeg)
here's a shot of the stainless steel two speed arm next to the stock aluminum arm. the hole is an EXACT fit, not loose like the stock one is. it is cast from surgical grade 316 stainless steel. the guy that made these up for me even added a little advertising.
(http://alantani.com/gallery/1/1_12_07_09_9_36_13_0.jpeg)
(http://alantani.com/gallery/1/1_12_07_09_9_36_16_2.jpeg)
the cost alone of the single speed arm is $10, the two speed arm is $12. add a couple of bucks for shipping if you want just the arms. tack on the cost of a kolekar grip if you want a full handle assembly.
hi alan do you still have these arms for my B870 single speed if so how much and how do i pay
gary, i do, but accurate changed the post size and most do not fit now. i can send you one to look at. send a pm with your address and i will mail it out. alan
Hi Alan,
Would one of these fit a Charter Special ? If they will could I buy two from you please.
All the very best, great site.
Pollack
Nice work!
Unfortunately, these arms will not fit the charter special. I believe http://alantani.com/index.php?topic=155.0 arms will.
the charter special arm is here. http://alantani.com/index.php?topic=155.0 send a pm if you want me to ship one out. thanks! alan
Hi Guys,
I think that I will keep looking, as I didn't want a counter balanced one. Thanks anyway.
Best Regards
Pollack
Hi Alan
Will either of these handles fit the Pro Gear CS series?
Cheers
Brad
Quote from: bradz on December 06, 2012, 10:02:31 AM
Hi Alan
Will either of these handles fit the Pro Gear CS series?
Cheers
Brad
Nope.
Cheers Bryan
Any of the jigmaster sized ones left?
Ron
Yes Ron, the jigmaster sizes are available.
yeah, about 100. let me know if you want one.
Would these be better for a 4/0 or 4/0 sized reel?
i have a nice one for the 113h.
Alan, I forgot all about these arms. I need two for the jigmaster size. I'll pm my address if they are still available.
Thanks, bob
check out http://alantani.com/index.php?topic=1518.15 for a comparsion with PG handle arms and Penn's arm
I will take 3.
Thanks
Ron
Alan, pm'ed my address for two of the arms. Are there any still available for the 113H? And how about the 114H?
Bob
still haven't caught on pm's. i have the stainless steel 113h arms, but no 114h arms. for the 114h, you've gotta drill out the old grip and bolt on a new one.