Print Page - TLD 20/30 two speed anti-reverse?

Title: TLD 20/30 two speed anti-reverse?
Post by: jurelometer on September 30, 2015, 09:48:18 PM

Can anyone enlighten me on how the anti-reverse mechanism works in these reels?
Looking at Alan's tutorial and the Shimano schematics, I don't see a ratchet, just the dogs. The only thing I can think of is the pinion serving double duty as a ratchet, but that seems a bit goofy.

Also has anyone seen dog failures on these reels?

Thanks,

Title: Re: TLD 20/30 two speed anti-reverse?
Post by: RowdyW on September 30, 2015, 10:41:38 PM

It's under the main gear & is one unit. Remove the handle screw & handle & it will drop out. You have to do that to service the bearing anyway.

Title: Re: TLD 20/30 two speed anti-reverse?
Post by: jurelometer on September 30, 2015, 11:59:36 PM

Quote from: RowdyW on September 30, 2015, 10:41:38 PM
It's under the main gear & is one unit. Remove the handle screw & handle & it will drop out. You have to do that to service the bearing anyway.

I think you are right for the one-speed version, but looking at Alan's photo of the two speed right sideplate (copy below), the dog is situated next to the pinion, not the main gear...

Title: Re: TLD 20/30 two speed anti-reverse?
Post by: RowdyW on October 01, 2015, 12:37:13 AM

Yes, my duh. I was thinking single speed.

Title: Re: TLD 20/30 two speed anti-reverse?
Post by: handi2 on October 01, 2015, 04:02:41 PM

It's the first gear on the spool.

Title: Re: TLD 20/30 two speed anti-reverse?
Post by: jurelometer on October 02, 2015, 06:59:39 AM

Thanks Handi2,

Seen any wear or failure on the dogs?

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: jurelometer on September 30, 2015, 09:48:18 PM