While looking through old bins for a wrench for John -- found this Penn wrench.
What does it go to?
Best,
Fred
I do not have one of those!
Interesting
Smaller Spinfisher guys, I believe up to the 710
(http://i1101.photobucket.com/albums/g431/pescatore1/Photo%20May%2006%203%2025%2042%20PM.jpg) (http://s1101.photobucket.com/user/pescatore1/media/Photo%20May%2006%203%2025%2042%20PM.jpg.html)
Sal
That makes sense, Sal --
Found it in an old box full of 714 & 716 NOS parts from the estate of a reel repair guy from years ago.
Looked at the box once or twice -- but never spotted the mystery wrench.
Thanks, Sal!
Best,
Fred
Haha..it only happens when you have more than your eyes could handle :).
Just found a couple other interesting ones while I was looking, but I think you've already shown these;
(http://i1101.photobucket.com/albums/g431/pescatore1/Photo%20May%2006%203%2059%2025%20PM.jpg) (http://s1101.photobucket.com/user/pescatore1/media/Photo%20May%2006%203%2059%2025%20PM.jpg.html)
It's neat to see how the lettering has changed along the way.
(http://i1101.photobucket.com/albums/g431/pescatore1/Photo%20May%2006%205%2038%2008%20PM.jpg) (http://s1101.photobucket.com/user/pescatore1/media/Photo%20May%2006%205%2038%2008%20PM.jpg.html)
I do remember about that beefy wrench in the middle, that came from a 9/0 in the lighthouse box. I sold that reel a long time ago, but somehow the wrench didn't make it to the box.
Sal
Very cool wrenches. So the square in the middle of the wrench is an adapter of sorts?
Square hole to adapter for the rotor nut, maybe?
This Reel Wrench Is Hard To Find. Fits Penn Levelmatic Reels Model 910 Thru 940. At One Time Keta Had Some Wrenches Cut For The Members That Needed One. None Of The Other Penn Wrenches Use This Size Handle Nut. Lots Of Guys Still Use These Reels, So It's A good Thing To Have.
Barry
I have 3 of these 940 reels and used to have a couple of wrench's. None to be found st this point. Anyone have one they would part with? Or a line on where to pick one up ...
Thanks .
Cool
the wrench gummpie44 shows, fits the handle nut on the levelmatics. harryk
I have a few peanut butter jars full of Penn wrenches.
Will check tomorrow.
Do you need the one that gumpie is showing?
Best,
Fred
I believe it was included with the 710's as my copy of this wrench came in a plastic bag with both parts of the wrench and a set of Teflon drag washers to lighten the drag setting on the 710 reel along with a small tube of Penn's Spinfisher lube (white tube with blue lettering).
Small hole fits the nut on the end of the bail wire while the die cast socket is for the rotor nut.
Also pictured is both sides of the included instruction sheet.
The large bent whench (3rd from the top) is for the 700, 706, & 704's. It came packed with my first year of production 704.Aluminium side plate with two swooshes and an Aluminium main gear.
Quote from: foakes on November 12, 2018, 02:27:03 AM
I have a few peanut butter jars full of Penn wrenches.
Will check tomorrow.
Do you need the one that gumpie is showing?
Best,
Fred
Yes Fred... that's the one...
Cool
Quote from: gumpie44 on May 07, 2017, 04:04:22 PM
This Reel Wrench Is Hard To Find. Fits Penn Levelmatic Reels Model 910 Thru 940. At One Time Keta Had Some Wrenches Cut For The Members That Needed One. None Of The Other Penn Wrenches Use This Size Handle Nut. Lots Of Guys Still Use These Reels, So It's A good Thing To Have.
Barry
I'm still looking for a wrench for my 920,930 and 940 penn reels... anyone out there have one they are willing to part with ??? If so ,here I am...
Thanks
Cool
Sorry Cool —
Do not think I have that one — If I run across one in the bins — I will let you know.
Best,
Fred
Keta Made Some Of These To Sell a While Ago.... To Fit 910-940 Reels, Might Still Have Some.
Barry
Thanks for the replies Fred and Barry, Last I heard Keta was willing to make some if there was enough demand. Any one else out there want / need one or some of these hard to find wrenches??? I'm in for 1 or 2...
Cool
Quote from: CooldadE on December 02, 2018, 01:28:35 PM
Thanks for the replies Fred and Barry, Last I heard Keta was willing to make some if there was enough demand. Any one else out there want / need one or some of these hard to find wrenches??? I'm in for 1 or 2...
Cool
I could use one.
Quote from: nelz on December 03, 2018, 04:04:45 AM
Quote from: CooldadE on December 02, 2018, 01:28:35 PM
Thanks for the replies Fred and Barry, Last I heard Keta was willing to make some if there was enough demand. Any one else out there want / need one or some of these hard to find wrenches??? I'm in for 1 or 2...
Cool
I could use one.
That's 3...
Cool
I'll take one too. But, I suspect that is not enough to justify a run.
-steve