How do you disassemble the spool on this reel to access the drags? The three prong spring washer looks to be pressed on the spool shaft.
Thanks!
Andy
https://flic.kr/p/WLa6p4
https://flic.kr/p/VFGG7j(https://farm5.staticflickr.com/4322/35236191454_67cda3faa9_k.jpg) (https://flic.kr/p/VFGG7j)IMG_9157 (https://flic.kr/p/VFGG7j) by Andy Smith (https://www.flickr.com/photos/120482089@N03/), on Flickr(https://farm5.staticflickr.com/4327/35942965461_a705358fda_k.jpg) (https://flic.kr/p/WLa6p4)IMG_9156 (https://flic.kr/p/WLa6p4) by Andy Smith (https://www.flickr.com/photos/120482089@N03/), on Flickr
Andy just push the top center of the spool and it will come apart in 2 pieces.
Thank you! Just did not want to force it and break anything. Spinning reels....grrrr
If you check a schematic there's not much in between the two other than a click spring and, maybe, a Teflon washer.