This offset handle will fit the following Penn reels and PRO Gear 454 and 545.
PENN Reels
==============================
113HSP
20, 20T
25GLS
30, 30T, 30TW
30S, 30SW
30VW (Older and Newer)
40GLS, 45GLS
50, 50T, 50TW, 50W
50S, 50SW
50VW
113H, 113HL, 113HLW, 113HSP
113MTL
220GTO, 230GTO (Also needs one 110-60 locking screw)
225LD, 245LD, 246LD
320GT, 321GT
320LD
320GT2, 321GT2
320GT2LC
330GT, 330GT2
340GT, 345GT
340GT2, 345GT2
349, 349H, 349HC
970, 980, 990
TRQ300LD
- Made in aluminum T6061-T4 (with heat treated for Harding)
- Off set bent in
- Overall length is little over 4.25 inches
- Handle lock screw included. Please note that lock screw will fit one side on the handle only
- Two holes position connection
- Available colors: black, sliver, green, red, blue and orange
- 25 pieces for each color
I will upload a finish product when it comes in.
The price is $9.99 + $2.61 shipping for one handle, and shipping will be $1.00 for each additional handle (only for US member). For international shipping, please send me an email at sales@prochallenger.com for more information.
There will be 10% off on total price if purchased handle arm with any knobs.
(http://i1280.photobucket.com/albums/a494/prochallenger/ff110d78-fb3b-40b2-a8c0-e1e4b29487df_zps2hktxzd9.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/f9e88204-25e0-43cb-9802-c3dcc9cedfa4_zps0if3kfso.jpg)
Looks good Alan. Possibly you may consider a full radius on the end. Looks much more trim with some of the bulk removed.
Have a great day, .. Lou
Wow! This should be a hot item...I'd like to see one for 112/Jigmaster also! 8)
Looks great Alan and nice price too!
I agree with Lou about the rear end radius.
Thanks for doing these,
Dom
Quote from: broadway on March 22, 2017, 08:01:40 PM
Looks great Alan and nice price too!
I agree with Lou about the rear end radius.
Thanks for doing these,
Dom
Quote from: STRIPER LOU on March 22, 2017, 05:08:01 PM
Looks good Alan. Possibly you may consider a full radius on the end. Looks much more trim with some of the bulk removed.
Have a great day, .. Lou
Hi guys,
I did have that radius thing in the drawing at first, but Sal requested to have this design. I think it is much stronger with more material.
Alan, a full radius blend will not make it weaker. You would probably have to add at least 1/8" of material or more to the make the full blend. Certainly not knocking Sal's idea or anyone else's for that matter.
Making the full blend radius will streamline it and get rid of some of the bulk. Pic shows full radius on the end for a cleaner look.
Just and opinion. Either way, thanks for your time and working on this.
all the best, .. Lou
No Lou, my request wasn't based only on strength, I thought it looks much better than the one with the full radius.
I have both as well, but prefer the one on top, I guess personal preference.
If Alan wants to change the drawings, that would be up to him, I'm still liking it as is though.
Sal
Not a big deal Mr. C.
As you said, just a matter preference. I do make them here on occasion but with my equipment its very time consuming and not very cost effective. I can tell you which ones seem to be preferred here though.
Have a great evening, .. Lou
Just an observation to cut costs.
You probably will not need 2 handle but set screws if the distance is correct. You only need the center one.
Quote from: STRIPER LOU on March 23, 2017, 12:56:43 AM
Not a big deal Mr. C.
Have a great evening, .. Lou
It never was Lou, have a great evening as well.
I missed this post while I was on a short holiday - it looks like a good design, I'm keen to see the final result. I will definitely be interested in a few, not only for my 113H but 349s & a Progear as well.
Thanks Alan!
Mike
I'm in for 1 silver and 1 red when these are ready. Aloha!
Hi Alan, will the blue match Tom's Cortez plates? I'm in for a few but have to decide on colors yet.
John
Quote from: thorhammer on April 06, 2017, 12:26:02 PM
Hi Alan, will the blue match Tom's Cortez plates? I'm in for a few but have to decide on colors yet.
John
It will be more likely the same blue as my 501 aluminum spool colors.
http://alantani.com/index.php?topic=14027.msg142679#msg142679 (http://alantani.com/index.php?topic=14027.msg142679#msg142679)
I will also use the same design for Jigmaster's and Newell's handles
Noted. I have that spool, so will be needing that jiggy arm when available :)
Are these still on track for the end of this month? Available on the website or here?
Quote from: badfish71 on April 17, 2017, 07:56:12 PM
Are these still on track for the end of this month? Available on the website or here?
It is on track to be here by the end of this month. They will be available throug the website.
Thanks,
Alan
These handles should be here by end of next week.
Finally, these handles are done, and they are on their way to Florida. They should be here next Tuesday or Wednesday (5/16 or 5/17).
Please note that I only have 25 pcs for each colors.
Alan, I'm still in for 2 red & 2 silver. Rudy
interested in two handles Alan
red and silver
10-4. I will send out a PayPal invoice when I get them.
These handles will be here tomorrow. I will upload some pictures tomorrow
Will they be on your website or should I order them here?thanks
For purchase this item, please send email or PM to me, and a Paypal invoice will be sent. Please let me know the state where your order will be sent to. If no state info, I will issue your invoice with FL 7% sale tax (it will be refunded sale tax if your order is out of FL).
There will be 10% off on total price if purchased handle arm with any knobs.
(http://i1280.photobucket.com/albums/a494/prochallenger/ff110d78-fb3b-40b2-a8c0-e1e4b29487df_zps2hktxzd9.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/f9e88204-25e0-43cb-9802-c3dcc9cedfa4_zps0if3kfso.jpg)
email sent for 1 silver and 1 blue.
Thanks
PM sent: 1 red handle & 1 red ALU 49 knob. Thanks for making these for us . mitch27
Quote from: mitch27 on May 18, 2017, 11:03:58 PM
PM sent: 1 red handle & 1 red ALU 49 knob. Thanks for making these for us . mitch27
You got invoice....... ;D
Thanks,
--Alan
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.
Quote from: badfish71 on May 22, 2017, 11:12:43 PM
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.
Can you post a picture?
Quote from: Black Pearl on May 22, 2017, 11:31:54 PM
Quote from: badfish71 on May 22, 2017, 11:12:43 PM
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.
Can you post a picture?
(http://i63.tinypic.com/2u3z0g7.jpg)
Quote from: badfish71 on May 23, 2017, 04:27:00 PM
Quote from: Black Pearl on May 22, 2017, 11:31:54 PM
Quote from: badfish71 on May 22, 2017, 11:12:43 PM
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.
Can you post a picture?
(http://i63.tinypic.com/2u3z0g7.jpg)
It is hard to match color. I will make some darker one next time.
This picture is from Sal.
(http://i1280.photobucket.com/albums/a494/prochallenger/1439D53F-0645-4BA7-A767-C30032E2BE03_zpsowdlozcp.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/513CDE02-4206-49C9-8307-7CB32D80B7C5_zpsobpbaesz.jpg)
got mines.. they look pretty good and are extremely light, thanks compadre
And a black one, along with a black knob:
(http://i1101.photobucket.com/albums/g431/pescatore1/Photo%20May%2025%209%2058%2049%20PM.jpg) (http://s1101.photobucket.com/user/pescatore1/media/Photo%20May%2025%209%2058%2049%20PM.jpg.html)
(http://i1101.photobucket.com/albums/g431/pescatore1/Photo%20May%2025%209%2057%2025%20PM.jpg) (http://s1101.photobucket.com/user/pescatore1/media/Photo%20May%2025%209%2057%2025%20PM.jpg.html)
Good job on these Alan, they're very nice!
Sal
Great looking handles at a very reasonable price! Am I correct that these should fit the penn 320gt since the fit the 113? If so I will probably order a couple.
Tight lines!
Sal...it looks great on that Mag Power! 8)
Quote from: obawon on May 29, 2017, 08:37:42 AM
Great looking handles at a very reasonable price! Am I correct that these should fit the penn 320gt since the fit the 113? If so I will probably order a couple.
Tight lines!
Yes, it will fit 320gt. I will list more penn reels which this handle fits.
PENN Reels
============================
113HSP
20, 20T
25GLS
30, 30T, 30TW
30S, 30SW
30VW (Older and Newer)
40GLS, 45GLS
50, 50T, 50TW, 50W
50S, 50SW
50VW
113H, 113HL, 113HLW, 113HSP
113MTL
220GTO, 230GTO (Also needs one 110-60 locking screw)
225LD, 245LD, 246LD
320GT, 321GT
320LD
320GT2, 321GT2
320GT2LC
330GT, 330GT2
340GT, 345GT
340GT2, 345GT2
349, 349H, 349HC
970, 980, 990
TRQ300LD
Quote from: Black Pearl on May 26, 2017, 12:12:13 AM
This picture is from Sal.
(http://i1280.photobucket.com/albums/a494/prochallenger/1439D53F-0645-4BA7-A767-C30032E2BE03_zpsowdlozcp.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/513CDE02-4206-49C9-8307-7CB32D80B7C5_zpsobpbaesz.jpg)
Just a beautiful reel..
Wow Sal, that is one absolutely stunning 113hn you put together. I'm a huge fan of all silver and you really nailed it on this build. Congrats !!
Ted
Heck of a reel you created there, Sal.
I hope you built that for Anthony 8)
Be good bud,
Dom
Hello,
Do you still make these? If so, do they fit the ProGear 541 & 441?
Thanks,
Darin
Quote from: Darin Crofton on September 01, 2018, 05:09:41 PM
Hello,
Do you still make these? If so, do they fit the ProGear 541 & 441?
Thanks,
Darin
I know it will fit the 545. For 441, I think that the JM handle might fit that. I am not sure about that.
Quote from: Black Pearl on September 01, 2018, 05:24:40 PM
Quote from: Darin Crofton on September 01, 2018, 05:09:41 PM
Hello,
Do you still make these? If so, do they fit the ProGear 541 & 441?
Thanks,
Darin
I know it will fit the 545. For 441, I think that the JM handle might fit that. I am not sure about that.
Was just on your website, will be getting 4 of your 113H gear packages, 4 of Adam's Insert Drag Kits, 4 offset handles from whomever? and want 4 SS DD Bridge assembly's from you if you're getting more (your site says out of stock)??? Thanks!