Print Page - TLD 50 LRS binding

Title: TLD 50 LRS binding
Post by: darrenforeal on July 09, 2014, 02:21:02 AM

Just picked up a used TLD 50II for trolling, and with around 20lbs of drag the handle binds when winding. Even with no spool pressure. I'm going to open it up, but it has been around 10 years since I worked on a TLD. What is usually the issue that causing the binding on this reels. Shouldn't do that with only 20lbs of drag IMO.... thanks for the assistance!

Title: Re: TLD 50 LRS binding
Post by: alantani on July 09, 2014, 05:47:46 AM

right main side plate bearing......... :-\

Title: Re: TLD 50 LRS binding
Post by: darrenforeal on July 10, 2014, 09:01:47 AM

THANKS ALAN! replace or just clean you think?

Title: Re: TLD 50 LRS binding
Post by: alantani on July 10, 2014, 11:05:34 AM

if it's rough at all, it's best to replace it. we have to do this all the time!

Title: Re: TLD 50 LRS binding
Post by: jonathan.han on July 13, 2014, 07:04:33 AM

routinely

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: darrenforeal on July 09, 2014, 02:21:02 AM