Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: darrenforeal on July 26, 2012, 07:53:22 PM

Title: Talica 8II "hot roding"?
Post by: darrenforeal on July 26, 2012, 07:53:22 PM
I just wanted to see if there had been anything done to these talica IIs that would improve freespool? I searched and didn't find too much. Thanks!
Title: Re: Talica 8II "hot roding"?
Post by: redsetta on July 26, 2012, 09:41:53 PM
G'day and welcome Darren,
The usual treatment will do the trick - pull the two spool bearings, remove the shields (being Shimano ARBs, they're likely already shieldless), clean thoroughly with carb cleaner (or similar) and dip in TSI301.
Let us know how you get on.
Good luck, Justin
Title: Re: Talica 8II "hot roding"?
Post by: darrenforeal on July 26, 2012, 09:44:24 PM
Quote from: redsetta on July 26, 2012, 09:41:53 PM
G'day and welcome Darren,
The usual treatment will do the trick - pull the two spool bearings, remove the shields (being Shimano ARBs, they're likely already shieldless), clean thoroughly with carb cleaner (or similar) and dip in TSI301.
Let us know how you get on.
Good luck, Justin

cool thanks. thanks
Text only | Text with Images