I recently bought got a nice used 50VSW that had had very little maintenance so I decided to do a full tear down and rebuild. I did this over quite a few evenings after work and I forgot to take pictures thinking the schematic and other resources would do. But now I am close to finishing and I notice two "spare parts" that I can't find on the sxhematic a slim washer(shim?) and an o-ring. Where would they go?
I meant to add pictures to the message but could not find how via Android and it took a while to work on my pc lol
The O-ring and the washer are in the centre of the pic. I put the other parts there for scale.
https://alantani.com/index.php?action=gallery;sa=view;id=28767
(https://alantani.com/index.php?action-gallery;sa=view;id=28767)
(https://alantani.com/gallery/28/medium_17054_21_07_19_7_56_42.jpeg) (https://alantani.com/index.php?action=gallery;sa=view;id=28767)
the shim washer could be somewhere on the main gears. the o-ring does not look familiar at all.
David,
The shim would have either went on the stud or on the inner drive plate. I agree with Alan, the O-ring does not look familiar to the 50VSW.
tony
Yikes, don't know which reel is missing an O-ring now lol
Which part number would that shim be on the schematic or is it just a factory adjustment on assembly like with shimming the main gear of spinners?
I did notice before taking the reel apart agin that the spool would engage slightly when in free spool too...
154 / 154A, B
tony
Thanks for the help, guys. I'm going to tackle the this weekend.