Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn University => Topic started by: Keta on December 03, 2021, 04:32:22 PM

Title: Low Gear RatioConversion for a Fathom FTH15
Post by: Keta on December 03, 2021, 04:32:22 PM
Does Penn make low ratio gears (4.8:1) for the Fathom star drag (FTH15) reel?   I can find them for the TRQ reels are they interchangeable?

4.8:1 TRQ Main Gear
https://www.mysticparts.com/PennParts/Parts/5-TRQ40.aspx (https://www.mysticparts.com/PennParts/Parts/5-TRQ40.aspx)

4.8:1 TRQ Pinion Gear
https://www.mysticparts.com/PennParts/Parts/13-TRQ40.aspx (https://www.mysticparts.com/PennParts/Parts/13-TRQ40.aspx)
Title: Re: Low Gear RatioConversion for a Fathom FTH15
Post by: Porthos on December 25, 2021, 06:14:59 PM
Gen I or II ?

Does this help?
https://www.bdoutdoors.com/forums/threads/fathoms-vs-torques-lever-drag-2-speeds-compare-to-star-drag.731220/#post-4978619

The MysticParts page for the Gen I 25 has the main gear/ pinion drop menus with the 15 listed...
https://www.mysticparts.com/P304FTHSD481-Custom-Stainless-Steel-481-High-Speed-Gear-Set-Optional-P33771.aspx
https://www.mysticparts.com/13-FTHSD12-Gear-Pinion-Gear-P27627.aspx

The MysticParts page for the Gen II 25 has the main gear/ pinion drop menus with the 15 listed...
https://www.mysticparts.com/PennParts/Parts/5-FTHii40SD.aspx
https://www.mysticparts.com/PennParts/Parts/13-FTHii40SD.aspx

Could PM Steve Carson...
Title: Re: Low Gear RatioConversion for a Fathom FTH15
Post by: Keta on December 25, 2021, 07:44:24 PM
Gen 1.  I forgot about this post.  The gears are the same as FTH 25N gears and I had a Pro Chalanger set.  Mystic also has them but no longer as a set.
Title: Re: Low Gear RatioConversion for a Fathom FTH15
Post by: Porthos on December 25, 2021, 08:41:54 PM
Enjoy your conversion.

4.8:1 is, IMHO, a bit high for any "power" reel but that's the way things go with current production star drags.
Title: Re: Low Gear RatioConversion for a Fathom FTH15
Post by: Keta on December 26, 2021, 12:57:44 AM
It was for a friend.
Title: Re: Low Gear RatioConversion for a Fathom FTH15
Post by: Tunanorth on January 29, 2022, 06:23:21 AM
Sorry for the delay!
Correct that on the "gen1" star drags, only Pro-Challenger makes the 4.8-1 gears.
However, I did ask the engineer way back at ICAST, and on the "gen2" [non-levelwind] star drags, the 4.8-1 gears out of the "P" models [25N, 30, 40], will in fact fit the smaller models.
Not sure what the IPT would be, probably in the 24-25 IPT range.

BTW, sad that I got put in Covid Jail, and did not get to see Alan at the ISE show in Sacramento last week.
West-Coasters should note, the Fred Hall Show is all but dead, and the "great gathering" of saltwater anglers will be the Pacific Coast Sportfishing Show in Orange County, Feb. 18-20.
Title: Re: Low Gear RatioConversion for a Fathom FTH15
Post by: Keta on January 29, 2022, 01:20:55 PM
Thanks Steve.