What is this for?
792BFF75-2117-436F-BA00-057E9735EBA7.jpeg
Its an oil/grease port
On some of my senators it doesn't go threw or to anywhere tho
Quote from: Irishdevil0311 on October 12, 2022, 10:40:43 PMOn some of my senators it doesn't go threw or to anywhere tho
There's usually a narrow slot that would allow the oil to penetrate within the sideplate. These things tend to seize up though.
Has the exact same function as the ports in the photo on the eccentric jack and the end spool/bearing cap. Place to put lube, and using the tube of Penn Grease included with the reel you could force it in under pressure. Look inside the side plate for an orifice that directly opens on the main gear. That is the primary function in every Penn I have torn apart. Easily plugged, hence why I have dental brushes in my tool arsenal. - john
It comes thru, it's just hard to tell where unless you know where to look. That particular oil port goes directly onto the main gear, and on the underside the hole is well hidden in the gear housing
I have a Penn 309 that has it but it doesn't go threw the side plate. I know it's a oiler. I should have been more clear with my question. As in did they mass produce side plates for different reels then fill voids with the oiler? Mess up in production and not bore it all the way threw? Etc.
btw the pic is not of my reel it self. I copied off another post for a example because my reel is not available, as it is employed with a friend at the moment.
Thank you
Quote from: Irishdevil0311 on October 13, 2022, 09:07:07 PMI have a Penn 309 that has it but it doesn't go threw the side plate. I know it's a oiler. I should have been more clear with my question. As in did they mass produce side plates for different reels then fill voids with the oiler? Mess up in production and not bore it all the way threw? Etc.
btw the pic is not of my reel it self. I copied off another post for a example because my reel is not available, as it is employed with a friend at the moment.
Thank you
If you look at the side wall of where the main gear is you will find a exit hole , it may be covered with grease . It supply s the main gear - pinion gear with oil .