Hi Alan,
I was wondering if you could help me??
I have a set of 4 Tyrnos 20's that I use for Sailfish and Black Marlin. I have used these reels trouble feel for a number of years now but after a number of stubborn I started to think about the drag cam / drag curve on these reels.
I fish 8kg line and set my strike drag at 3kg, however when the level is pushed up to sunset it increases dramaticly to over 8kg, resulting in bust off's.
I have spoken to a guy from Shimano here in Australia, asking about the Tiagra 16 drag cam - if it would fit into the Tyrnos 20. He said it wouldn't but there was a washer that could be removed (or turned around - I can't remember) however didn't say what part number it was.
After looking at the parts list I was thinking that he was talking about part #20 - Coned Disc Spring.
Your help / advise would be much appreciated - I am wanting to achieve 3kg at Strike Drag and around 4.5 - 5kg at Sunset (level all the way forward past the button)
Thanks
Sailfisher
here is the schematic for the tyrnos 20 two speed. take a look at the coned washer #20. i THINK it uses a heavy belleville washer. i have a bunch that are thin. they would definitely lighten up your drag curve! measure yours and let's see if they match up. i can ship them out. i would normally throw them away.
http://fish.shimano.com/media/fishing/SAC/techdocs/en/Conventional/05TYR20-2Speed_v1_m56577569830615689.pdf
Thanks Alan,
I'll measure them up and get back to you in the next few days.
Sailfisher
Hi Alan,
I have measured them up - 14mm O.D. x 7mm I.D. x 0.9mm thickness. The only thing I now realise is that I did measure the height of the bow in them.
There is 4 of them all up. 2 side by side facing one way and 2 side by side facing the other way eg - (()). Do you think if I first tried running with 3 facing one way and one facing the other eg - ())), that would make any difference?
Thanks Sailfisher
If you want to lighten your drag curve, orient those washers in ()(). I you went ())), it will ramp up faster but initially will be softer.
the bellevilles i have are 7.22mm id x 13.89 od x 0.49 th x 0.86 ht. i can send these out easily. send a pm with your address. first, though, reconfigure your bellevilles to a "()()" orientation and see if that helps.
Thanks guys
I'll try the ()() and let you know how it goes.
Sailfisher