Print Page - Daiwa Saltist 40 (SST40)

Title: Daiwa Saltist 40 (SST40)
Post by: Bayside Arty on February 01, 2010, 03:31:30 PM

Hi Alan I just picked up a new Daiwa Saltist 40 (SST40) do you know if the drags come dry? should i open it up and grease it and what grease would you use thanks in advance oh yeah hows my tiburon squidder comming along

Title: Re: Daiwa Saltist 40 (SST40)
Post by: alantani on February 01, 2010, 05:42:19 PM

some of the star drag saltists are now being quietly sold with greased carbon fiber drag washers. not sure which ones. the squidder is 6th or 7th in line. gonna try to clear out everything this week. stay tuned! ;D

Title: Re: Daiwa Saltist 40 (SST40)
Post by: Bayside Arty on February 01, 2010, 06:09:44 PM

Thanks Alan

Title: Re: Daiwa Saltist 40 (SST40)
Post by: george.s on February 01, 2010, 07:55:45 PM

have a look here.

http://www.daiwafishing.com.au/daiwa.cfm?page=reels&reels=overhead&product=saltist

Title: Re: Daiwa Saltist 40 (SST40)
Post by: Bayside Arty on February 02, 2010, 11:01:23 PM

Thanks for the info

Title: Re: Daiwa Saltist 40 (SST40)
Post by: alantani on February 04, 2010, 12:51:37 AM

that's great! now if they could just fix the anti-reverse system. btw, arty, your reel is on it's way back. there was only one small spot at the 6 o'clock position of the right inner ring that was rubbing, so i ground it down a little. it spins like crazy now! alan

Title: Re: Daiwa Saltist 40 (SST40)
Post by: Bayside Arty on February 12, 2010, 02:36:58 AM

Alan Thanks A1 serv. I just might have to mag it now to slow it down that squidder never spun so fast ;D Payment was sent on 2/10

Again thanks

Arty

Title: Re: Daiwa Saltist 40 (SST40)
Post by: alantani on February 12, 2010, 08:57:09 AM

my pleasure! ;D

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: Bayside Arty on February 01, 2010, 03:31:30 PM