Could someone confirm I can replace the original Mark III/IV friction drag washers with those for Penn 113H (part # 6-113 HT-100)? If yes, any suggestions what I could use as for under the gear spacer? I know sets are available but I am looking for 3 sets and a reasonable price. Thanks!
Measure the drag washers and compare them to the drag washer size links for Penn and SmoothDrag at https://alantani.com/index.php?board=3.0.
Thanks for your help, Bryan!
"Penn 113H (part # 6-113 HT-100)"...those are what I used. I don't remember what I used under the gear though. Those are great reels.
Thank you!
Hey Folks,
Just got my hands on the Triton lll model, and it is neat to see a 4/0 drag assembly on a 300 size reel. But sorry Bryan, I coppied your geniuse and bought another set of titanium drag washers and had all six ground down to the needed size to make up a 5 stack drag assembly. It seemed to me, like the thing to do since aftermarket parts are limited for this product line and Lord knows, the safe needs another reel....
Have a happy Thanks Giving every one and Peace on earth!