Reel Repair by Alan Tani

I've never yet had to do that to a Tranx, sounds like a job i would rather avoid as well.
Take care, don't want to replace a side plate.

I don't always take my own advice  

I have a Saltist STT40H, also required a clutch lever a long time ago which had a known problem.    Diawa replaced it with a lever from a Saltiga, problem solved forever.

If you can't obtain it look at that for a possible solution.

Have you tried a screw From a 2062 to see if it will fit?

Clones (same reels & parts) of the Shakespeare 2052  early versions (Es) Pflueger 550, HI 1945 & Eagle Claw ECL...later versions (Ds) Ted Williams III.

Quote from: Midway Tommy on Today at 04:56:01 AMEarly versions (Es) Shakespeare 2052, Pflueger 550, HI 1945 & Eagle Claw ECL...later versions (Ds) Ted Williams III.

Thanks!!

This is a good tip for application of grease to tight spots.  There are cheaper ones out there but this one is about the best you can get.

Hello,

Can anyone tell me what the clones are for the Shakespeare 2052? I need the screw that holds the level wind lever to the drive gear assembly. The screw is part X18 (left hand thread).

Thanks,

Steve

Somehow I missed this post, glad I saw it, that reel paintjob came up awesome!!

Quote from: ReelFishingProblems on Today at 02:18:02 AMSteve,

Money received! Thank you

Whoop Whoop!

So looking forward to this trip.

Crab Pot

Steve,

Money received! Thank you

Nick,

Full payment sent via Venmo (Kelly, my wife's account).

Please let me know you got it.

Thanks,

Steve