Hi everybody!
Greetings from the Southern Hemisphere.
Is there a tutorial on how to breakdown a Chronarch 100 SF, or similar?
I would like to try to make a standard maintenance on mine, but, the right way.
Thank you all!
G'day Durval,
Schematic here: http://www.shimanofish.com.au/media/fishing/SAC/techdocs/en/Low_Profile/00CH100SF_v1_m56577569830640138.pdf (http://www.shimanofish.com.au/media/fishing/SAC/techdocs/en/Low_Profile/00CH100SF_v1_m56577569830640138.pdf)
The Chronarch is almost identical to the Curado, so this tutorial will point you in the right direction: http://alantani.com/index.php?topic=2529.0 (http://alantani.com/index.php?topic=2529.0)
Good luck - let us know if you run into any difficulties.
Cheers, Justin
I appreciate your prompt help Justin.
By any chance would you know the sizes of the spool bearings.
Thank you.
As far as I can remember, it's 3x10x4mm (x2).
Cheers, Justin