a friend requests a large order of bearings for the accurates used by his charter operation, so i though i'd post the dimensions.
accurate single and two speed boss reels (not the extremes)
left side plate - 0.187 x 0.5 x 0.195 inch
left and right spool - 0.187 x 0.5 x 0.195 inch
right side plate - 7 x 17 x 5 mm
preset knob bearing - 0.187 x 0.5 x 0.195 inch
accurate atd 6 and 12
left side plate - 8 x 14 x 4 mm
left and right spool - 8 x 14 x 4 mm
right side plate - 9 x 20 x 6 mm
inner and outer handle shaft - 12 x 18 x 4 mm
preset knob bearing - 7 x 14 x 5 mm
accurate two speed Valiant 400 reels
left side plate - 0.187 x 0.5 x 0.195 inch
left and right spool - 0.187 x 0.5 x 0.195 inch
right side plate - 7 x 17 x 5 mm
preset knob bearing - 0.187 x 0.5 x 0.195 inch