Print Page - Penn Spinfisher 650SS

Title: Penn Spinfisher 650SS
Post by: nicky.phil on May 15, 2009, 02:31:54 AM

Hi Alan, after reading your post on how to improve the drags of my Penn Spinfisher I am trying to change my 650SS and 550SS Thrust washer ( teflon ) part no. # 60 750 and # 60 550 to HT-100 hoping to get more drag on my reels. do you have the part no. for the HT-100 replacement? many Thanks :) :) :)

Nicky from Manila, Philippines

Title: Re: Penn Spinfisher 650SS
Post by: alantani on May 15, 2009, 04:43:45 AM

nick, measure out the teflon washers and match them up with something on this list. let me know if you have trouble finding a match, but it should be there. it will most likely be a #6-60. alan

http://alantani.com/index.php?topic=21.0

Title: Re: Penn Spinfisher 650SS
Post by: nicky.phil on May 27, 2009, 05:00:25 PM

Hi Alan, thank you very much for the info. after changing the Teflon washers I was able to get 14 lbs of drag from my reel. again many thanks. Nicky :) :) :)

Title: Re: Penn Spinfisher 650SS
Post by: alantani on May 30, 2009, 02:51:30 AM

glad it worked!

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => Penn => Topic started by: nicky.phil on May 15, 2009, 02:31:54 AM