Print Page - new handle and dimensions for the stainless 98-505 gear sleeve head

Title: new handle and dimensions for the stainless 98-505 gear sleeve head
Post by: jurelometer on April 21, 2014, 09:58:24 PM

Ready to move into handles for the jigmaster. Thinking about something bent in stainless, a bit longer than stock, but still with a counterbalance.

But I need some good dimensions for the gear sleeve. If there is anyone out there with a Tani 98-505 or 98-60 sleeve and a caliper, I would greatly appreciate the correct dimensions for the spot where the handle fits - here is my best guess based on a mangled brass sleeve:
(https://lh4.googleusercontent.com/-eI8PmkM5HVo/U1WOTgvYW4I/AAAAAAAAAtU/mP05iOEd8F0/s800/gearsleeve.jpg)

Jurelometer

Title: Re: new handle and dimensions for the stainless 98-505 gear sleeve head
Post by: alantani on April 21, 2014, 11:13:34 PM

i can measure them tomorrow morning. i'm stuck at work all day today.

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn 99/Jigmaster/SurfMaster/Squidder Tutorials and Questions => Topic started by: jurelometer on April 21, 2014, 09:58:24 PM