Dear Dawn,
please advise replacement carbontex equivalent for Ryoga 1016 and Shimano Ocea Jigger 2000P as i don't see any specific product for these two reels. thanks
Hi
The Trinidad 30 size drag washer set can be trimmed slightly on the outside edge to fit in the Jigger.
As far as the Ryoga, I don't know. You can send me measurements, or check here: http://www.smoothdrag.com/Carbontex_washer_sizes.pdf
Thanks!
Dawn
Thanks for the reply dawn..
i'll measure the diameter first of the Daiwa Ryoga.. thanks for the info regarding the Ocea Jigger 2000P.
thanks
Hi Dawn,
my customer measure his Daiwa Ryoga 1016 and he measure with ruler (no micrometer)...
there are two drag washer.
the first one having 30 mm x 22 mm
the second one having 32 mm x 27 mm
i think for the first one i can use number 47 (closest) with 30.95 x 21.6
and
for second one i can't found any match..
please help.. thanks
I think the best you can do would be #50, and open the center hole with a dremel or sandpaper
Dawn