Pro Gear 255 main gear

Started by anieves, January 25, 2022, 02:06:50 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


Hey folks,

I have a Pro Gear 255 I've fished for years and worn down the teeth of the main gear. I picked up a Penn 5-500 gear thinking it would fit, but the size is off and stops the eccentric jack from fully disengaging. What's the part number for the gear I should be looking for? And should I upgrade to a stainless pinion if I'm sticking with a brass gear? 



The main and pinion wear together, usually best to change both.  I'd think that gear should fit ok, that's strange.
Do what you can with that you have where you are


welcome!  the jigmaster 500 main and pinion should work fine.  go with those! 
send me an email at for questions!


I have a 255 with stainless main and pinion gears. The yoke and jack are also stainless. Did they come this way?


the yoke, jack and pinion gear, yes.  the main gear, i am not so sure.   :-\
send me an email at for questions!