Reel Repair by Alan Tani

Good to know. In the italian book on zangi. As i recall no mention. Will be on lookout for more Zangi variants.

Interesting thread. I haven't tried splicing nylon mono into PE braid but I've done a lot of nylon into dacron splices. I have encountered the same problem and discovered it was caused by fine fibres in the dacron braid forming a web in the 'tube' that prevented the smooth and tapered nylon from progressing.

Exactly the same nylon had no problem when trying to splice into the same strength dacron of a different brand and, indeed, with a different spool of the original troublesome stuff.

Interestingly, the troublesome spool also had several flaws along the length - fluffy spots and tight bits. There were half a dozen along a 1000 yard length that I had to cut out and then splice the dacron to itself to form a single length again. What a pain!

Howdy!!

I confess that until I started using Yamalube and another marine grease, I always used car wheel bearing grease (in 1lb tins) and, similarly, car engine oil where oil was needed. It comes in one gallon (or used to!) cans. My thinking was that car engines and wheel bearings endure more stresses and strains than reels (if serviced regularly) so those lubricants ought to be fine.

The drag nut raising too high tell me spool had to push in too far before lock up ,there is no adjust can be done on these reel .Older French Mitchell lay line very nice ,not these Taiwan reels

Thanks Tommy

Quote from: quang tran on May 02, 2024, 05:40:08 PMand when did they make these 900 reels then later series 4420,4430,4440...I also have 300 Pro came with wooden box ,the handle quickly broke so I have to use regular handle on it

The 900 series reels were after the Garcia bankruptcy, from 1980-84 when Browning bought/owned Mitchell. The 4400 series reels crossed over from those Browning Mitchell 1980-84 days and carried on for a little while into the post 1984 Mitchell Sports days.

True'izum

Hi.

Quote from: foakes on Today at 12:08:06 AMEverything packed and ready to ship tomorrow, Steve —-

Included screw, bail spring, bail, and tape for your DQ 5001.

Best, Fred

Thanks Fred, I really appreciate it.