Daiwa SL50 & Grandwave 40/50 Anti-Reverse Bearing installation Tutorial
This is a very easy and very effective upgrade.
Importantly-
This installation will alleviate the off-axis movement of the drive shaft during pressurised use.
Prolonging your gear life through prohibiting uneven gear meshing and therefore wear, when under load.
Aswell as providing an alternative Anti-reverse mechanism. ;)
The new drag stack arrangement exploded.
Very impressive, I have often wondered if this was possible, now I know. Thanks for posting
This post is full of WIN! ;D
very nice!!!!!
I guess this can be applied to the SL20SH as well?
What say ye ?
;D -
Im Glad to see that the installs have been enjoyed - Thanks for the compliments.
JaypeeGee - great thinking on you part in connection with the SL20/30 option. Im sure that it will be possible.
After having a look at SoCal's 5th pic from the top of his post I cannot see any reason why it would not work.
A measurement or two needs to be made to compare the dimensions of the driveshaft holes between the SL50 sideplate and the Smaller SL20 sideplate.
http://alantani.com/index.php?topic=10526.0
I think they will be the same - unfortunately I cannot compare as I parted with my small SL reels along time ago for the small Grandwave reels.
If and when you try it have a look at the schematics ,it looks like the drag stacks are very similar in layout between the larger and the smaller reels , so thats a plus.
Please - Let us know how it goes .
TX again
Totally will. Also thank you for the detailed post here and at sealine . esp on the mag assembly creation.