I bought a cheap 330 DAM with a broken foot and a couple of other needs.
Decided to fix the foot first and think about the bearing second.
I chose a 30-65 stand from a Penn to use as a donor .
Have repaired all sorts of things with Super Strength ARALDITE and have great respect for it.
Help from Penn
Ready for some paint.
Now for that bearing and some bail springs.
Greg
Nice work Greg, that will give the old 330 a new lease on life. Did you use a belt sander to shape the implant?
Mike
Looks good. Many things can be fixed perfectly with Epoxy.
I would have been inclined to tap a thread for a SS countersunk screw through both the foot and "implant".
But looking at it, probably not necessary.
I knew someday there'd be a use for the pile of crusty stands I have...great fix Greg! 8)
Excellent work, Greg!
Good idea!
Best,
Fred
??? This may be the fix for this 440 stand . The aluminium solder rods didn`t stick well at all.
Helluv an idea, Greg! 8) That should work very well!
Great idea Greg! thanks for showing us how its done.
Sal
Thanks for all your comments guys.
Mike..I only used a hacksaw and a couple of small files and some sandpaper.
Greg
Darn, I can't see the pictures Greg. What gives?
-steve
Steve
Not sure why you can't see the pics. I can see them on my computer.
Greg
Quote from: oc1 on March 06, 2019, 09:11:03 PM
Darn, I can't see the pictures Greg. What gives?
-steve
Steve, try rebooting your computer. Dominick
cannot see photos either.
Greg, did you use the "additional options" button below the post? I can see the photos. Dominick
Quote from: Dominick on March 07, 2019, 12:23:13 AM
Greg, did you use the "additional options" button below the post? I can the photos. Dominick
I don't think so, Dominick. The photos have text between them and you can't do that using the additional options. A/O is limited to 4 photos and they're after all text. They're not in the Gallery, either, so they must be on an outside host.
Quote from: Midway Tommy on March 07, 2019, 03:13:18 AM
Quote from: Dominick on March 07, 2019, 12:23:13 AM
Greg, did you use the "additional options" button below the post? I can see the photos. Dominick
I don't think so, Dominick. The photos have text between them and you can't do that using the additional options. A/O is limited to 4 photos and they're after all text. They're not in the Gallery, either, so they must be on an outside host.
You are probably right Tommy. There is no indication of how the photos were posted. I looked in the galleries and did not see them. Dominick
Worthy effort basto. A new lease on life granted to a worthy reel.
Frank
Dominic
I use Photobucket
Greg
Thanks Basto. For those of you that can't view the photos are you seeing a Photobucket emblem? If so and you are using windows 10 there is a download workaround it's called "photobucket imbedded image fix." Dominick
I can see them now. Good fix Greg.
-steve
Thanks Steve. I think its plenty strong enough. The rod clamp holds it all together anyhow.
Greg
My favourite job on reels is replacing bearings.
The bail spring just needed a good clean. Now to spool up with some 12lb mono and fish.
All up cost was $26.60 AUD
Thanks for the comments
Greg
Now that's a inventive ideal. You just rang my bell for something total different.
Thx
Great job on fixing the reel foot, Greg. BTW, where did you get your replacement bearing?
Quote from: festus on March 09, 2019, 07:53:59 AM
Great job on fixing the reel foot, Greg. BTW, where did you get your replacement bearing?
At a bearing shop here in Australia. Just gave them the size over the phone after measuring the old one. $6.60 AUD
I got a 331 through U.S.P.S. this morning. Been raining all day so I took it apart for a good cleaning. Tomorrow I'll put it back together. The stock bearing cleaned up pretty well with some lacquer thinner and a toothbrush.
I cleaned my original one 3 times, but it still sounded like a knife going across toast. Just too much rust on the insides of the races.
Yours looks good.
Dominic when you reboot it, do you use your left or right boot, Greg I like to use Techni glue epoxy, it does`nt run as much & is very strong. cheers Don.
Needed Some 330 Pinion Bearings A While Ago ... Did A Google Search Using Size. Found A Seller In China, Bought A Sleeve Of 10 Very Cheap ! On Ebay, Popular Size .. Was Used For Skateboard Wheels.
Barry
they would have to be tough for skateboards