I try to keep the respective threads updated, but Ill keep this thread with the current status of anything thats not in stock.
114H/115L insert and drag kit: Inserts are done, and I have the washers on order. I will have 25 kits available in 2-3 weeks.
113H inserts and drag kits will be available in a couple of weeks. I still have a couple of kits left that fit the Penn 349H.
Daiwa 600H insert kits: I still have a couple kits in stock, and the 900H/910 is on my to-do list.
Big senator insert and drag kit: First run completed. Starting a list for the 2nd run. This list will be open until the end of September.
The counterbalanced handles for the 112H have been redesigned, and are now available in 113H and 114H/115L sizes as well. Any out of stock handles should be available in another week or so. I also added a 113H size to the curved handle with holes.
Any plans for any current/future Daiwa parts?
Leo
900h/910 insert drag kits are next in line for the daiwas but I need to get the penn insert kits finished up first. After that, I'll start looking at other models, like handles for the smaller/newer models.
I'm always open to suggestions though.
That's exciting! I have two 900h. I'm going to be using them soon I hope.
Hi Adam,
Keen as for a 900H kit, do you still have the octagonal drag washers for the Penn SS series?
Regards
Mark
Quote from: MFB on August 13, 2015, 09:10:35 AM
Hi Adam,
Keen as for a 900H kit, do you still have the octagonal drag washers for the Penn SS series?
Regards
Mark
Not at the moment, but I can have more made.
Quote from: Three se7ens on August 13, 2015, 02:25:55 PM
Quote from: MFB on August 13, 2015, 09:10:35 AM
Hi Adam,
Keen as for a 900H kit, do you still have the octagonal drag washers for the Penn SS series?
Regards
Mark
Not at the moment, but I can have more made.
Adam,
What model's Penn SS spinner "octagonal" metal washers are you making? Whats the thickness of the washers?
Leo
Quote from: LTM on August 14, 2015, 04:55:52 AM
Quote from: Three se7ens on August 13, 2015, 02:25:55 PM
Quote from: MFB on August 13, 2015, 09:10:35 AM
Hi Adam,
Keen as for a 900H kit, do you still have the octagonal drag washers for the Penn SS series?
Regards
Mark
Not at the moment, but I can have more made.
Adam,
What model's Penn SS spinner "octagonal" metal washers are you making? Whats the thickness of the washers?
Leo
Im going to start from scratch on these. When I get some other projects finished up Ill figure up the material and reel models. I think this time Ill offer the complete stack: new cf octogonal washers and new metal keyed washers.
I was looking on your website for the 114H insert and drag kit and did not see it, is this a product you are still making?
Quote from: rjones on August 23, 2015, 12:37:15 PM
I was looking on your website for the 114H insert and drag kit and did not see it, is this a product you are still making?
Yes, but its out of stock at the moment. I have inserts cut already, I just need to get the washers and put the kits together. Im expecting them to be ready around the middle of september.
Sounds good really looking forward to this
Quote from: Three se7ens on August 23, 2015, 04:41:55 PM
Quote from: rjones on August 23, 2015, 12:37:15 PM
I was looking on your website for the 114H insert and drag kit and did not see it, is this a product you are still making?
Yes, but its out of stock at the moment. I have inserts cut already, I just need to get the washers and put the kits together. Im expecting them to be ready around the middle of september.
Adam, I saw on the site that the 113H was listed but not highlighted. Does this mean just outta stock?? Will you be restocking these kits for the 113H
Bob
Quote from: BMITCH on August 24, 2015, 10:24:57 AM
Quote from: Three se7ens on August 23, 2015, 04:41:55 PM
Quote from: rjones on August 23, 2015, 12:37:15 PM
I was looking on your website for the 114H insert and drag kit and did not see it, is this a product you are still making?
Yes, but its out of stock at the moment. I have inserts cut already, I just need to get the washers and put the kits together. Im expecting them to be ready around the middle of september.
Adam, I saw on the site that the 113H was listed but not highlighted. Does this mean just outta stock?? Will you be restocking these kits for the 113H
Bob
Anything on my site thats dimmed out, and not clickable, means I offer it, but its out of stock at the moment. If you want something thats out of stock, send me a PM or email. Some things that I dont sell often may be out of stock for a while, unless I get requests.
😉
Adam any update on the 9/0 insert kits, handles?
Quote from: David Hall on September 03, 2015, 01:14:06 AM
Adam any update on the 9/0 insert kits, handles?
Handles are on order, expected by the end of next week. Im still waiting on material for the cf washers for the insert kits, so probably 2 weeks before I have those available.
Picked up a bunch of parts from the cutter today. I still have some machining to do on everything, but the following will parts will be available again starting this weekend:
titanium 16T a/r kits for penn 750ss/850ss - 20 sets
titanium 16t a/r kits for penn 9500ss - 20 sets
big buy senator insert kits - http://alantani.com/index.php?topic=15219.msg167302#msg167302
I have a few of the 114H/115l inserts cut. But I think its still going to be a couple of weeks on the kits, as I dont have all of the components. But I am working with another supplier on a big batch. The demand has been very high for these, and Im trying to find a supplier that can better meet the quality I need with these.
My stock on handles is running low on many styles at the moment, but Ill be sorting that out soon. Ive basically been in limbo the past 2 months with not being able to get new parts cut due to issues with the cutter. Seems to be sorted now, so I shouldnt be out of stock of anything for much longer.