I have recently purchased a Millionaire cv-z 253, US, plus I have also purchased a Millionaire SW 203, Japanese model. I ordered new bearings and drag washers for both. The question is do I need to grease the drag washers or let them run dry? Planning on a complete teardown of both when received.
I am an Alan Tani disciple, and therefore the mantra is "Cal's grease on CF drag washers." It is the #1 upgrade you can do to just about any reel unless it comes with greased CF washers.
Ron
By the Way; Welcome to the forum.
Quote from: Ron "Jones on October 05, 2017, 01:25:36 AM
I am an Alan Tani disciple, and therefore the mantra is "Cal's grease on CF drag washers." It is the #1 upgrade you can do to just about any reel unless it comes with greased CF washers.
Ron
By the Way; Welcome to the forum.
👍👍👍
x3 particularly in the salt - you'll get a much smoother drag and salt water can't get in :)
Thank you for the help gentlemen
Welcome to the site, from Minnesota.
Frank