This project was such a no brainer it is beyond silly. We are still using a shift lever designed in the 1930's by Otto Henze, the founder of Penn reels. Fast forward 85 years and it's time for something new....
....the all new "tank top" shift levers are 100% CNC machined from a solid piece of 6061 aluminum.
The first version is a bit too proud and will not work with offset handle arms.
A 2nd batch will be ready within 2-3 weeks that will not stick out as far and will allow for offset arms.
First batch of 100 went like wildfire on simply word of mouth. The few I have remaining will be held off for those who buy a kit. Fear not, more are on the way very soon in all colors of the Tom H rainbow. :D
Also been tinkering with colored O-rings, and all future shift levers will come with a set of black O-rings. These shifters will be offered at $20 each, and there will be a small discount on orders of 3 or more. I've sent some out to the Ohana for feedback and I'm sure we will soon hear from them.
These levers are available @ Mysticparts.com, and also at CortezConversions.com
Very impressive.
....and right at home on Cortez Conversions sideplates
-Ted
Looks nice!
Will one of these levers fit on a Cortez Conversion side plate for a 113H. I put one together recently and would love a black lever to put on the reel.
Quote from: mley1 on January 05, 2017, 06:56:55 AM
Will one of these levers fit on a Cortez Conversion side plate for a 113H. I put one together recently and would love a black lever to put on the reel.
Yes, any reel with a 113 eccentric. Reels pictured above with new lever are Cortez 4/0's (113H)
Jigmasters, and senators up to 4/0. If you have offset handle arm you'll need to wait a couple weeks for the next batch. This first batch is for flat handle arms.
These levers also fit many pro gear reels. Here are just a few. 251, 255, 2000, 2500, 545, 541, 454, 440, 3000 & 3500 ....also KC Lee Pro, and several others.
They look awesome Ted. Reely dresses up the reel!
............Lou
I'm excited :)
Simply spectacular, comme toujours... must have a few! :D
Umm... any chance of a pink one? ;) ;D
~A~
Quote from: Aiala on January 05, 2017, 09:11:12 PM
Simply spectacular, comme toujours... must have a few! :D
Umm... any chance of a pink one? ;) ;D
~A~
Aiala, you know if I had a pink one it would already be on the way. I am currently out of levers, but will have more in about 3 weeks......in the colors already posted.
I seem to recall a stunning green Lee Pro Jigmaster that resides in Palm Springs. How bout a green shifter for it ??
I got your pm. Thanks! I responded back and look forward to the new shift lever.
Ted,
Thank you so much for getting your awesome new shift levers to me this week. Just when I was certain the rasta jigmaster (which you already generously donated a mint gold accuframe to)...these things come along and change the game all over again. They look amazing being color matched the the cortez plates and the o-rings are a perfect touch. They also feel great in hand and to operate, perfect weighted feel to them as the eccentric cam snaps them back and forth.
Before and After
A closeup
Shakas and a BIGGG Aloha,
Kyle Yogi
That's a beauty Yogi......The Rasta like nobodys business.....very cool indeed !!
-Ted
Lookin good there.
Looks, feels and works great on my Pro Gear 545!
Quote from: MarkT on January 07, 2017, 09:39:32 PM
Looks, feels and works great on my Pro Gear 545!
Wow :o, that's one sweet reel Mark. Thanks for sharing.
-Ted
I'll be needing two green ones. You have outdone yourself on these!
Patrick
:o are these just for the 113h? I would like one in silver and two in red when ready.
I am temporarily out of stock. The first batch of 100 went on mostly word of mouth.
I do have another larger batch coming and will be ready for sale by end of January(about 3 weeks)
These levers fit several Penns, including jigmaster, and all small senators up to 4/0.
If your request is posted on this thread, rest assured you'll get a PM from me as soon as the next batch is in my hands.
Thanks -Ted
I would like to by a red one for a Penn 4/0 when available again
Quote from: Maxed Out on January 05, 2017, 01:50:47 AM
This project was such a no brainer it is beyond silly. We are still using a shift lever designed in the 1930's by Otto Henze, the founder of Penn reels. Fast forward 85 years and it's time for something new....
....the all new "tank top" shift levers are 100% CNC machined from a solid piece of 6061 aluminum. The first version is a bit too proud and will not work with offset handle arms.
A 2nd batch will be ready within 2-3 weeks that will not stick out as far and will allow for offset arms.
First batch of 100 went like wildfire on simply word of mouth. The few I have remaining will be held off for those who buy a kit. Fear not, more are on the way very soon in all colors of the Tom H rainbow. :D
Also been tinkering with colored O-rings, and all future shift levers will come with a set of black and colored O-rings. These shifters will be offered at $18 each, and there will be a small discount on orders of 3 or more. I've sent some out to the Ohana for feedback and I'm sure we will soon hear from them.
Happy New Year Ted,
I'll take 5. One of each color.
Thanks, Steve
Ted, they're perfect! Please count me in for at least a half dozen on the new style. The fit and look is excellent! Great work.
................Lou
Quote from: BigRed4/0 on January 08, 2017, 09:36:31 PM
I would like to by a red one for a Penn 4/0 when available again
I recognize that reel and the carnage ulua rod Matt! The koa Brock Fee knob probably is a good idea if you're using it in cold weather. There's a few other SS and aluminum upgrades on this site u could throw money at if you wanted to, besides Ted's new shift levers.
But where was the picture taken Kyle?
Ted,
Put me down for:
-2 Black
-2 Silver
-1 Gold
Ted,
I changed my order.
John
You can put me down for two of each color Ted, just make sure everyone else gets thiers first.
Tom
Quote from: Bryan Young on January 09, 2017, 05:03:47 AM
But where was the picture taken Kyle?
Haha I forget where he moved. But I'm guessing its somewhere that has sturgeon in a river?
Quote from: Yogi_fish808 on January 09, 2017, 05:28:49 AM
Quote from: Bryan Young on January 09, 2017, 05:03:47 AM
But where was the picture taken Kyle?
Haha I forget where he moved. But I'm guessing its somewhere that has sturgeon in a river?
Looks like the Columbia river in eastern Washington. That also looks like a dam in the background. Just a guess
Quote from: Yogi_fish808 on January 09, 2017, 05:28:49 AM
Quote from: Bryan Young on January 09, 2017, 05:03:47 AM
But where was the picture taken Kyle?
Haha I forget where he moved. But I'm guessing its somewhere that has sturgeon in a river?
I moved to Idaho lol. Yeah I love the knob. Yeah I'll probably end up buying a jig as well and upgrading it. But yeah I still need more parts on the 4/0! Lol. I can't believe I never got on this forum lol. Yeah I'll be looking for SS internals soon. And if can upgraded clicker
Just met with my machinist this morning, and next batch of new levers will be going to the plater on Monday. Should be ready to fill orders before end of this month.
Please post your requests in this thread and you'll get notification as soon as they're ready to go.
Same 5 colors ....PLUS NEW ADDED COLOR OPTION.....GOLD !!
Yep, colors will be Silver, Red, Black, Green, Ice Blue, and Gold
just got to the snail mail and there they were. very impressive work!!!!!
Ted,
I'll need:
One (1) Black
Two (2) Silver
One (1) Gold
...for now.
Thanks
Mike
Quote from: Maxed Out on January 09, 2017, 11:15:05 PM
Just met with my machinist this morning, and next batch of new levers will be going to the plater on Monday. Should be ready to fill orders before end of this month.
Please post your requests in this thread and you'll get notification as soon as they're ready to go.
Same 5 colors ....PLUS NEW ADDED COLOR OPTION.....GOLD !!
Yep, colors will be Silver, Red, Black, Green, Ice Blue, and Gold
I'll take a Red one as soon as they are ready
Do you have any plans to make these a little longer? I have a couple of reels that really want the 21 - 49 length lever in order to work well.
Ted, please put me down for one (1) red and one (1) silver.
Thanks! :)
~A~
Quote from: Aiala on January 10, 2017, 02:34:03 AM
Ted, please put me down for one (1) red and one (1) silver.
Thanks! :)
~A~
Will do Aiala
I sent you a green lever for your Lee Pro, hope it made it to you 8)
Beautiful levers!! I got mine in the mail today, and it's GORGEOUS on my 113H build!! It works wonderfully. Now all I need to put on is one of Alans handles.
Quote from: BigRed4/0 on January 10, 2017, 12:13:23 AM
Quote from: Maxed Out on January 09, 2017, 11:15:05 PM
Just met with my machinist this morning, and next batch of new levers will be going to the plater on Monday. Should be ready to fill orders before end of this month.
Please post your requests in this thread and you'll get notification as soon as they're ready to go.
Same 5 colors ....PLUS NEW ADDED COLOR OPTION.....GOLD !!
Yep, colors will be Silver, Red, Black, Green, Ice Blue, and Gold
I'll take a Red one as soon as they are ready
Don't forget you also want an SS double dog bridge. drag kit, SS handle arm, Cortez plates...etc, etc, etc. i'm sorry in advance for introducing you to this site haha.
Quote from: mley1 on January 10, 2017, 02:48:37 AM
Beautiful levers!! I got mine in the mail today, and it's GORGEOUS on my 113H build!! It works wonderfully. Now all I need to put on is one of Alans handles.
It looks like your star wheel is on backwards. Part numbers inward. The more rounded edges outward. ;D
Quote from: RowdyW on January 10, 2017, 07:55:22 AM
Quote from: mley1 on January 10, 2017, 02:48:37 AM
Beautiful levers!! I got mine in the mail today, and it's GORGEOUS on my 113H build!! It works wonderfully. Now all I need to put on is one of Alans handles.
It looks like your star wheel is on backwards. Part numbers inward. The more rounded edges outward. ;D
Oooops! Thanks for pointing that out. Rookie mistake on my part. I also neglected to put the plastic washer on between the nut and lever. I'll fix that today.
please put me down for 7 silver and 7 black, thanks!
btw is the baja/us 113 shift lever in the works?
Quote from: Yogi_fish808 on January 10, 2017, 06:45:35 AM
Quote from: BigRed4/0 on January 10, 2017, 12:13:23 AM
Quote from: Maxed Out on January 09, 2017, 11:15:05 PM
Just met with my machinist this morning, and next batch of new levers will be going to the plater on Monday. Should be ready to fill orders before end of this month.
Please post your requests in this thread and you'll get notification as soon as they're ready to go.
Same 5 colors ....PLUS NEW ADDED COLOR OPTION.....GOLD !!
Yep, colors will be Silver, Red, Black, Green, Ice Blue, and Gold
I'll take a Red one as soon as they are ready
Don't forget you also want an SS double dog bridge. drag kit, SS handle arm, Cortez plates...etc, etc, etc. i'm sorry in advance for introducing you to this site haha.
Lol yeah I'll get all that in time. If I can find red Cortez plates for cheap lol. I already got drag kit and ceramic bearings. Just need SS everything else lol
Ted, I can use one each in gold and silver and two in black. Thanks for coming up with these, they add a nice touch to these reels. No rush, whenever it works for you.
Regards,
Charlie
Quote from: Potiguar - AKA MeL B on January 10, 2017, 11:39:55 AM
please put me down for 7 silver and 7 black, thanks!
btw is the baja/us 113 shift lever in the works?
Hi Mel, I notice the only difference is the shape of the cutout for the eccentric. Should be no problem to make that happen. How many and which color ??
-Ted
hi ted! just 2 silver and 2 black (113 USA) for me + the 7s and 7b (113H)...thanks!
Quote from: Potiguar - AKA MeL B on January 10, 2017, 09:51:18 PM
hi ted! just 2 silver and 2 black (113 USA) for me + the 7s and 7b (113H)...thanks!
Got it Mel, I'll meet up with Chris on Thursday and make it happen
-Ted
Just gave 2 thumbs up on updated design change from Chris (My machinist) which will allow more room for offset handle arms. Same basic design, just thinned down a bit. The illustration shows one o-ring slot, but of course there is 2. The original design on the right, new lower profile lever on the left. Sorry for fuzzy pic, but it's all I have for now.
-Ted
Quote from: Maxed Out on January 10, 2017, 10:11:56 PM
Just gave 2 thumbs up on updated design change from Chris (My machinist) which will allow more room for offset handle arms. Same basic design, just thinned down a bit. The illustration shows one o-ring slot, but of course there is 2. The original design on the right, new lower profile lever on the left. Sorry for fuzzy pic, but it's all I have for now.
-Ted
Still looks awesome Ted! Can't wait wait to get one in my hands!
Just got (3) shift levers from Ted -- these are unbelievable...
Guess I should start building up some reels for personal use.
From Tom at Cortez -- Couple of narrow Jigs, couple of 99 sizers -- then put together this beautiful Blue Ribbon Squidder Jr from Tom also.
Parts from Bryan & Alan.
Thank You for the great products, Gentlemen!
We are more fortunate than we know.
Cannot take any of this for granted -- these products are remarkable.
Best Always,
Fred
Quote from: Maxed Out on January 10, 2017, 02:38:51 AM
Will do, Aiala...
I sent you a green lever for your Lee Pro, hope it made it to you! 8)
Ted, it sure did, and omigosh, lookee here:
Simply stunning, eh what?? Now
that's a 99! Thank you so much! :D
~
A~
Can you put me down for 3 levers for jigmaster 1 red 1 silver and 1 black when available
Mahalo
Jason
Are you kidding me ?? .....That's gotta be the hottest looking Jigmaster in the galaxy !! Do you have a warm fuzzy feeling Aiala ??...that's Carl Newell giving you a big bear hug. 8) 8)
Jason, gotcha covered. Should be about 3 weeks and I'll have them ready.
Fred, you have squirreled away some components that are now unobtainium (word Fred invented, please refer to Websters "Ohana" dictionary). Can't wait to see what's in store.
-Ted
Quote from: Maxed Out on January 12, 2017, 12:12:33 AM
Are you kidding me ?? .....That's gotta be the hottest looking Jigmaster in the galaxy !! Do you have a warm fuzzy feeling Aiala ??...that's Carl Newell giving you a big bear hug. 8) 8)
Jason, gotcha covered. Should be about 3 weeks and I'll have them ready.
Fred, you have squirreled away some components that are now unobtainium (word Fred invented, please refer to Websters "Ohana" dictionary). Can't wait to see what's in store.
-Ted
So if we want to buy one. We just state it on here correct? Or do we send you a PM with our Email?
So if we want to buy one. We just state it on here correct? Or do we send you a PM with our Email?
[/quote]
Please post your requests for new levers right here on this thread and I'll contact you as soon as this batch is ready.
Ted
Ted, everybody seems to forget to put the nylon washer under the screw for the lever. ??? ??? Rudy
Gorgeous reel Aiala, Ted's lever really brings it out.
I would like 1 silver and 1 black, Thanks
Put me down for 2 silver jigmaster levers when they are ready
Awesome green 99 Aiala! Love the Lee pro plates and Ted's shift lever.
Aloha,
Kyle
Ted, after plowing snow the last three days, finally got around to installing the two you sent..I'm hooked! (2) more silver and (2) more red. Thanks, Greg
I could use 6 when they're ready 2 blue 1 silver 1 black 1 green 1 red. Thanks Ted
Just got the lower profile prototype that should work with all or most offset arms. Here is the new lever on a Pro Gear 454 with offset handle arm. Still a solid 3/8 clearance. This will be the lever design from here on out, whether you have offset or flat handle arms.
.... Please continue to post your requests on this thread. Should be about 3 weeks and I'll be shipping out the new batch.
Looking great! My request: 2 silver, 1 blue, 1 red.
I'd like another black one please.
I got the Red 1st gen. From Keith...please send me the new style for offset handles in Silver please!
Hi Ted , Well I'm in . 1 red 2 black 1 silver . Thanks for making these for us . mitch27
(REVISED) Hey Ted, got a few installed the other day and they look great. Excellent work!
Please put me down for more (2) blue
(2) red
(1) black
(2) green
(1) gold
If its possible to get them all with black "O" rings that would be great. If not that's OK too as their going to look great no matter what.
Your work is appreciated and thanks for offering these!
best regard's, .. Lou
Quote from: STRIPER LOU on January 18, 2017, 01:14:53 AM
Hey Ted, got a few installed the other day and they look great. Excellent work!
Please put me down for more (2) blue
(1) red
(1) black
(2) green
(1) gold
If its possible to get them all with black "O" rings that would be great. If not that's OK too as their going to look great no matter what.
Your work is appreciated and thanks for offering these!
best regard's, .. Lou
Thanks Lou, and I have extra black O-rings so every lever will have the black ones for sure. Colored O-rings will be an added option and thrown in for no charge. I'll have better matching color O-rings this next go round.
I'm picking up the next batch of levers tomorrow and sending to plater this week, so 2-3 weeks and we will be back in business.
-Ted
Ted, it has been a rough winter so far, I had a concelletions on one of my projects at the last minute and my cookie jar is almost empty. If you don't mind, put a couples aside for me, maybe two of each for all colors. if you have any old style, I take those as well, but as I've said, you will need to wait a little until I put some cookies back in that jar.
If you need to move these, I understand and please don't worry.
Thanks Ted!
Sal
No problem Sal. I'll put the stuff on lay-away for you. I'll bury it all in a coffee can so nobody else can get at em. They'll be 2 paces west of the 4th blueberry bush, just in case something happens between now and then.
Ted
Quote from: Maxed Out on January 18, 2017, 06:42:28 AM
No problem Sal. I'll put the stuff on lay-away for you. I'll bury it all in a coffee can so nobody else can get at em. They'll be 2 paces west of the 4th blueberry bush, just in case something happens between now and then.
Ted
Huh? I checked the blueberry bush last night. ;D There was nothing there. How big are your paces? ::) Dominick
Quote from: Dominick on January 18, 2017, 06:16:27 PM
Quote from: Maxed Out on January 18, 2017, 06:42:28 AM
No problem Sal. I'll put the stuff on lay-away for you. I'll bury it all in a coffee can so nobody else can get at em. They'll be 2 paces west of the 4th blueberry bush, just in case something happens between now and then.
Ted
Huh? I checked the blueberry bush last night. ;D There was nothing there. How big are your paces? ::) Dominick
Ted has the same pace as me Dominick... you just got there too late :-X
Quote from: Dominick on January 18, 2017, 06:16:27 PM
Quote from: Maxed Out on January 18, 2017, 06:42:28 AM
No problem Sal. I'll put the stuff on lay-away for you. I'll bury it all in a coffee can so nobody else can get at em. They'll be 2 paces west of the 4th blueberry bush, just in case something happens between now and then.
Ted
Huh? I checked the blueberry bush last night. ;D There was nothing there. How big are your paces? ::) Dominick
Sorry Dom, forgot to mention "true west" ;D ;D. Using magnetic reading on your compass would have you 6" off from the spot. 8) -Ted
Ted, The old style levers arrived in the mail late today..... I put them on a Cortez JM and a 500s that took some donated parts from the Cortez build. They look great. I will need 2 more silver new style levers and 1 in red.
Tried to add a photo and IE crashes every time..... Worked with Firefox..
Very nice Dan. Both reels look great. That 501 is just plain mean looking. I can see you've been shopping here on the forum by looking at that 501 you built. Love it !!
....and I'd like to see a pic of that silver beach before you start modifying it. You may have a early model worthy of keeping all original.
-Ted
Inside the two reels are Black Pearl double dog bridges and gears, smooth drag washers, SS post from Scott's and I have a crank and stars on their way from Adam. The shift lever is the icing on the cake.
I will post some pictures of the Silver Beach soon.
Hi Ted,
Nice work with the design of these, and then the refinement to reduce the profile (and wide range of color choice). Do you ship these gems to international members? I seem to remember the first 4/0 spacer bars were US shipping only.
Thanks,
Mike
Quote from: mhc on January 19, 2017, 12:24:58 PM
Hi Ted,
Nice work with the design of these, and then the refinement to reduce the profile (and wide range of color choice). Do you ship these gems to international members? I seem to remember the first 4/0 spacer bars were US shipping only.
Thanks,
Mike
hi Mike, thanks for the inquiry. I am working on facilitating shipping across the pond. One way or another we'll make it happen.
-Ted
Update: New batch of lower profile levers are in my paws and heading to plater today. Should be about 2 week turn around. I also had my machinist make a few that fit the eccentric of a Baja 113, and us113. It's same lever, just different cutout to fit the us113 eccentric. I have 15 samples, and 5 are spoken for, the other 10 are first come, first served. If there's demand I will possibly have more made for the Baja/us113.
2nd pic is the Baja lever. The ring is sitting loose is why it looks like the lever rubs against it, but when reel is assembled it works as it should, without rubbing. It will be silver or black.
-Ted
Dibs on (1) US113 lever.
Thanks Ted!
Thanks Steve, also FYI.....
...the Baja/us113 levers will be same price as the other levers I'm offering....$18 each, with a discount on additional levers in same order.
-Ted
Ted, will you post out to New Zealand? I've had good luck with untracked regular mail for small parts.
Thanks Peter
Sure thing Peter, after all, the Ohana is worldwide !!
I am working on least expensive shipping across the pond, so please post your requests even if you live outside the USA, and please post your general location so postage can be estimated....Thanks.
-Ted
Ted, can I get a black one for the penn baja
and for for penn 113h
1 Green
1 Red
2 black
1 blue
Jigmaster
1 Red
Thank you Peter
Peter
put me on the list for the following:
(1) jigmaster green
(1) 113H green
(1) 113H red
(1) 113H silver *ill need to double check this, its for my PG545*
Ted; correction
1-JigMaster red
2-Silver
Joe
Wow, I never thought I'd have this kind of reaction all from a shift lever. I'm very humbled.
Adam, the lever fits your pg541, 545, 454,400 and several others I listed earlier in this thread..... Mark T, our resident Pro Gear guru has installed a couple and says they work great.
Quote from: Maxed Out on January 19, 2017, 08:06:42 PM
Quote from: mhc on January 19, 2017, 12:24:58 PM
Hi Ted,
Nice work with the design of these, and then the refinement to reduce the profile (and wide range of color choice). Do you ship these gems to international members? I seem to remember the first 4/0 spacer bars were US shipping only.
Thanks,
Mike
hi Mike, thanks for the inquiry. I am working on facilitating shipping across the pond. One way or another we'll make it happen.
-Ted
Thanks Ted,
I would like;
2 Red
1 Blue
1 Silver
No hurry at all - we can talk about the details when they turn up & you have caught up with the orders.
Thanks again
Mike
now... what was it?... 4 paces west of the 2nd blueberry.... and watch out for Dominick....OK, got it!
Congrats Ted,
Sometimes the simplest ideas are the best eh?
I'm sitting here in the same boat as Sal. The rain has me working minimum hours. But I'll be putting in an order down the road too.
I bet you are going to have a third run at some point...
PUT ME DOWN FOR 2 Red for US 113 please
Quote from: BigRed4/0 on January 20, 2017, 08:16:17 PM
PUT ME DOWN FOR 2 Red for US 113 please
My apologies Mr. Red, everything went to the plater yesterday. just black and silver on the first small batch of 15. Other colors can definitely be done in the very near future. I'm planning another run of levers before end of Feb. and we can do red us113 levers in that run.
Ted
Quote from: mhc on January 20, 2017, 07:19:26 AM
Quote from: Maxed Out on January 19, 2017, 08:06:42 PM
Quote from: mhc on January 19, 2017, 12:24:58 PM
Hi Ted,
Nice work with the design of these, and then the refinement to reduce the profile (and wide range of color choice). Do you ship these gems to international members? I seem to remember the first 4/0 spacer bars were US shipping only.
Thanks,
Mike
hi Mike, thanks for the inquiry. I am working on facilitating shipping across the pond. One way or another we'll make it happen.
-Ted
Thanks Ted,
I would like;
2 Red
1 Blue
1 Silver
No hurry at all - we can talk about the details when they turn up & you have caught up with the orders.
Thanks again
Mike
now... what was it?... 4 paces west of the 2nd blueberry.... and watch out for Dominick....OK, got it!
Got it Mike, shipping will not be an issue at all...... and yes, 4 paces due west, but now I forgot which bush ;) ;)
FYI, new levers fit the jigmaster and up, including 113h. All have the exact same original equipment Penn lever(#66). The new lever fits them all. Toms jiggys and 4/0's, Accurate reels, Pro gear, Lee Pro, etc.
It is not compatible with the smaller penns like squidder. Tom H makes the sweet squidder levers for all you squidder fans out there. (Cortez Conversions)
-Ted
Quote from: Maxed Out on January 21, 2017, 01:37:56 AM
Quote from: BigRed4/0 on January 20, 2017, 08:16:17 PM
PUT ME DOWN FOR 2 Red for US 113 please
My apologies Mr. Red, everything went to the plater yesterday. just black and silver on the first small batch of 15. Other colors can definitely be done in the very near future. I'm planning another run of levers before end of Feb. and we can do red us113 levers in that run.
Ted
Ok no worries. I'll just keep checking back until I see that your making red ones again.
-Matthew
Ted i need one of silver, one of red, one of ice blue, and one of gold.
Michael
can't wait to get mine especially the US 113s. hey ted! photo, with lever installed on the US 113, did it huh? more interests ;D :D ;) :)
thanks for doing this!
When the next batch is ready I'll take 1 in black. Thank you very much Ted!
Aloha,
Kyle
1 RED (WHEN AVAILABLE) 1 SILVER FOR JIGMASTER
THANKS
MARK
Thanks to the Ohana for all their support. 8) 8)
Please continue posting lever requests on this thread.....Should be about a week and the new levers will be back from anodizing and ready to ship.
-Ted
I think you have me down for 2 red and 1 ice blue.
If you have extra ill take 5 silver too!!
Keith
2 each in every color for me, Thanks!
Ted,
1 silver for Baja special (will take black if no silver avail)
1 red
1 green
thanks for making these available, Steve
Ted, I will take 2 silver, 1 red and 1 black. I posted here and also mentioned this in a PM.
please put me down for:
113h - 4 black
113h - 2 Red
thanks Sean Maguire - Love the 4/0 Magnum you sold me!!!
I'm counting about 50 requests for silver so far, and not sure how many is in this batch. I think it's 60. I have more going to anodize next week, so if I run out of silver, rest assured I'll have more very soon, so please continue to post requests on this thread.
Thanks to all -Ted
I think you got a winner here my friend. You should think about matching aluminum front crossbar. Just saying
Hey Ted, I need one for the tank to go with Lou's knob. Red of course. Dominick
You can change my 5 silver to black please.
Keith
Quote from: handi2 on February 03, 2017, 09:52:59 PM
You can change my 5 silver to black please.
Keith
Sure thing Keith.
Please continue to post your requests on this thread. Next batch of levers will be ready to ship out by end of this week
Thanks to the "Ohana" for your support. -Ted
2 red and 1 black for me please.
one silver, one red please
Hey Ted- sign me up for one silver and one black for a Jigmaster.
Thanks!
Quote from: Maxed Out on February 04, 2017, 07:25:24 PM
Quote from: handi2 on February 03, 2017, 09:52:59 PM
You can change my 5 silver to black please.
Keith
Sure thing Keith.
Please continue to post your requests on this thread. Next batch of levers will be ready to ship out by end of this week
lemme know what I owe. I hope you recall what I asked for with the levers and clamps because I'll have to go look again lol
Thanks to the "Ohana" for your support.
-Ted
In for four jigmaster levers
2 silver
1 red
1 blue
All matching o rings if possible
Come on Friday! My new Cortez asks about her silver e-lever every day!
Just 1 red for senator 4/0
Quote from: BigRed4/0 on February 08, 2017, 11:13:51 PM
Just 1 red for senator 4/0
Will do, pleae PM your address and paypal info.
Thanks, -Ted
.....Any further requests should be posted on the other "gen2" thread in this section. Thank you for your support !!
Quote from: Maxed Out on February 08, 2017, 11:46:50 PM
Quote from: BigRed4/0 on February 08, 2017, 11:13:51 PM
Just 1 red for senator 4/0
Will do, pleae PM your address and paypal info.
Thanks, -Ted
.....Any further requests should be posted on the other "gen2" thread in this section. Thank you for your support !!
PM sent