Although I have GOBS of Spinning Reels I don't Care for them but still I keep getting them and Fred got me addicted to Dam Reels because of their Engineering and Quality but I recently acquired a Mitchell 750 in a box in pieces .
Got it all together and it functions however the Bearings are shot and it is going to cost over 20 bux to get New ones .
My point is I guess is .
Is this Reel even worth 20 bux since I never even heard of a 750 and can't find NADA about it .
Or just put it in with my other Gobs of Spinning Reels I don't like in the First Place ::)
Send me the bearing measurements. I might have them.
Keith
Thanks Keith .
I had to go to the Shop today and of course I left those sizes at home so will post them this eve.
Had em saved on my Flea Bay list
14 x 7 x 3.5
and 17 x 9 x 4 Both in M&M'S ;D
According to mikesreelrepair.com it's called the "Long Shot". Interested to know whatcha think of the quality.
Metal Spool ,Metal Bail Housing , PLASTIC FRAME with Self Tapping Screws and CRAP GEARS :'(
Expensive Bastard Size Bearings . However it is a Light lil thing.
*****Correction ******
Everything is Plastic except the Spool ,Cheap Gears and Shaft.
If a Bird was to describe this Reel he would say
CHEEP !