Reel Repair by Alan Tani

......  still soak the greasy parts in Mineral Oil before ultrasonically cleaning them -- to start the cleaning  ............ . Make sure all of your solvent and flammable cleaners have a screw on lid for safety.  Occasionally I  ............ 't be too careful.  Never put solvents, lacquer cleaners, or any volatile substances into the ultrasonic  ............  or owner. Cash talks.  I have friends who use Ultrasonic cleaners for firearms parts, as well as cleaning  ............  the opportunity to get a good buy on a quality ultrasonic cleaner -- then the only thing you will say is " ......

......  2016, 06:01:28 PMIm going to have to invest on an ultrasonic cleaner later down the line. An suggestions to  ............ ..  Honestly, if a reel repair person ever uses an ultrasonic cleaner -- they will wonder why they did not use  ............  and tired of freezing my butt off using spray cleaners and a tooth brush this time of year. I have a  ............  114H that needs some Ultrasonic love. The drive train is coated with nasty,  ......

......  plastic, painted, anodized, and graphite parts.  Ultrasonic cleaner works well with these cleaners also.   ......

...... :01 PMBryan --   You can buy a new SS high wattage ultrasonic cleaner on ebay for vetween $100 to $200.  I have  ............   Keith sez they operate very well.  The key to US cleaners, IMO, is enough solid state electronics to  ............  and using smaller containers for varying types of cleaners -- then just dropping them into the reservoir so  ............ .  All that goes in the reservoir is water -- all cleaners are in separate jars. Quick, easy, less  ............  due to the sand.  I'll have to look at another ultrasonic cleaner. I sure hope they are UL Listed. I will  ......

...... Ultrasonic cleaners work by vibrating at ultrasonic  ......

......  those pictures were before the ultrasonic...I took those pictures so when I went to put  ............  see how they went back together...speaking of ultrasonic cleaners those things are awesome! I asked for  ......

......  I know is that having two ultrasonic cleaners has really improved productivity.  ......

......  reels are really tolerant of even the harshest cleaners.  Most of your older baitcasters are very durable. ............  the common cleaning solutions so much.  I use an ultrasonic cleaner for 90% of my jobs.  But many times, on  ......

...... 💧, dry, lube, and assemble.  I do use an Ultrasonic Cleaner — which speeds the processes, and seems  ............  most of these jobs.  For me, about the only cleaners I use regularly, are plain white vinegar, simple  ......

......  caution because it is flammable, like many of the cleaners we use. It does more than loosen the caked on  ............  simple green, purple degreaser, Dawn -- plus an ultrasonic cleaner.  Best,   ......

......  or graphite —  Then, after scrubbing (I use an ultrasonic cleaner to get 95% of the old crud out of the  ............ ) —  But a toothbrush, cleaners, elbow grease, and lots of rinsing work well also  ......

......  plastic and alloy parts should be cleaned with an ultrasonic cleaner with Dawn dish soap and warm water —  ............  clean with a Sonic Cleaner.  Be wary of any cleaners with a plastic reel — even Simple Green will  ......

......  , mch easier to service.  On another note arent ultrasonic cleaners the best thing since sliced bread . Only  ......

......  super bowl. What are you doing posting here about ultrasonic cleaners? ......

......  with SG -- but only a 3 minute soak in the SG & Ultrasonic Cleaner -- rinse and done...  Part of what we  ............  (sometimes the hard way, unfortunately) is what cleaners will clean but not damage parts -- plus how long  ......

...... Ultrasonic will give it a thorough clean but at added  ............  the home, floor cleaner, enviro friendly drain cleaners. It's not just for fishing reels  ......

...... -- A, healthier for you (simple green or citrus cleaners) and B, faster/better solvent (carb cleaner in a  ............  denatured alcohol. the isopropyl alcohol in a ultrasonic cleaner (put it in a glass jar in the water bath  ......

......  fluid is a great penetrating oil. If you have an ultrasonic cleaner put the part in a small jar with the 50/ ............  acetone trans fluid mix. Put the jar in the ultrasonic cleaner, fill it with water to surround the jar,  ............  let it run a while. The ultrasonic has done wonders for me to help work in  ............  parts that are stuck. Glass jar works best in the ultrasonic to help transmit the vibrations. I have one of  ............  harbor freight ultrasonic cleaners it has been going strong for me the last  ......