jimmer had a great idea of having a running list of the different sizes of drag washers for all the reels. yes, jimmer is on a roll. if everyone chips in, this could be a real time saver for everyone. the list will go by manufacturer (penn, shimano, etc.), then by model name (say, curado), then by model number (100D, 300E) and then by drag washer location with the dimensions. the first drag washer will be the one under the gear, then numbered in order of assembly. just post your drag washer dimensions here and the moderators will add it to the list. to make it easy, let's put them all in millimeters (ID x OD x TH). jimmer, thanks for the great idea!
what about stacks that have been changed and are not the originals.material,size and thickness.
not sure. this is sort of a work in progress......
Penn Captiva Liveliner CLL5000
(3) spool washers 5 x 19.5 x 0.75
(1) baitrunner washer 8.25 x 20 x 1.03
Shimano Sustain 1000FD
(1) 4.15 x 19.64 x 1.08
Shimano Calcutta CTE250DC
Under gear 8x25.5x1.03
Main drag 24.50x32.90x1.05
The main drag size can be increased by decreasing the the inner diameter to 11.20x32.90x1.05.
I'm not sure how wise that would be as the drag registers #8.5 with Carbontex.
Pflueger President WLPL
Under gear 8x18.50x0.95
Main drag 16x26x1
Shimano charter special 19.2x44.5x1.25 ears at 90 degrees 5.7 wide x 47.7 across
Okuma convectors cv30d and cv45d other 30 and 45 size convectors. Under bearing - 9x33.15x.55 in gear 1) 13x33x1.1 2)8x36x1
Alan and Bryan,
Where do I find this BB/drag washer list? Ive been documenting my reels with drag and BB dimensions, I may be able to contribute to the list. What format do I use: OD, ID, WIDTH (THICKNESS)?
Leo
Daiwa SL50SH
4 off 32.9 OD x 9.8 ID x 1.1
1 off 20 OD x 8.1 ID x 1.1
1 off 25.6 OD x 8.6 ID x 1.1
Sorry guys,
I found the list's.
Leo
'15 Shimano Calcutta Conquest 300
3 stack
27 OD x 8.5 ID X .5
Main gear
27 OD x 8.5 ID X 1
Daiwa Tanacom 1000
Small - Need 1 (Under main Gear) = Smooth Drag Carbontex # 10 - O.D. = 20.5 mm, I.D. = 08.1 mm, Thickness = 0.5 mm
Large - Need 5 (actual drag washers) = Smooth Drag Carbontex # 15 – O.D. = 21.6 mm, I.d. = 10.6 mm, Thickness = 0.76
Daiwa Tanacom 750fe Bull, 5 years old reel.
Small - Need 1 (Under main Gear) = O.D. = 19.56 mm, I.D. = 07.5 mm, Thickness = 0.55 mm
Large - Need 5 (actual drag washers) = O.D. = 18.65 mm, I.d. = 8.95 mm, Thickness = 0.76
I can add Smooth Drag info when I receive the answers from Dawn.
Randy
Note that the 750fe uses smaller drag disks than the US version of 750. The metal disks also use four ears v. two.
Daiwa Millionaire - Original models from 1960's, 70's, and early 80's (including Millionaire II)
Not to be confused with later Millionaire Models
Model 3R, 3RM, 4H, 4HM, 5B, 5H, 5HM, 6B, 6H, 6HM, 6RM, 500M, 600M, 5000M, 6000M =
19.94 mm OD
8.38 mm ID
.89 mm TH
(Three washers)
Model 3H =
22.10 mm OD
12.01 mm ID
.58 mm TH
(Three washers)
Model V =
24.59 mm OD
10.76 mm ID
.93 mm TH
(Just one washer)
Greetings:
I am brand new and still not sure of my way around the forum. Please kindly show me where to find the drag washer running list. Many Thanks!
Tai
Tai - best way to navigate the forum; hit Welcome and introduce yourself, let folks know why you are here and then everyone can direct you better. - john
Greeting John:
Thank you. Just posted in "Welcome".
Tai