Reply here to reserve your insert drag kits. I will PM you with ordering information as they become available. I will have a few kits for the 113H and 114H/115 available this week. The rest will be coming shortly after.
Prices are as follows:
Penn Reels
349H - $42
113H - $42
114H/115 - $49
116 - $54
117-118 - $56
Daiwa Reels
600H/610 - $46
900H/910 - $47
Adam, am I still on the list for 2 114h/115H?
.............. Lou
Sigh me up for one each
349
114H
Could use a few titanium stars too if you have any
Thanks,Sheridan
I want two for the 600h & 1 for the 900h, also 2 for the 113h thanks!
I'm in for one for the 600H, Thanks.
Adam, I'll take 2 for a 113h and 1 for a 114h.
Thanks Jim
I'll take a 114h kit.
Thanks Adam.
I for the 349H and 1 for the 113H...
Cool
Hello Adam,
Please sign me up for the following:
2-114H/115
2-116
1-600H
1-900H
Thanks Chris
1 x 113H for me please Adam.
Thanks, Justin
I'd like one for the 113H please!
Thanks,
Mike
I would like to order 1 insert kit for the 116L 12/0.
farmer 56 here two 113h and one 114h kits
I have a few orders shipped out already, and Ill have the rest of the 113H and 349H kits requested ready to ship early next week. Ill have some of the daiwa 600H kits ready next week too, but it will be a bit longer on the rest.
thanks everyone! And be sure to keep up with your PM's if youre on this list.
I'll need one for a 600H and 900H.
If they use the same sleeve, then why are the insert kits different?
Main gear size is different. ;D
Quote from: Shark Hunter on September 15, 2018, 12:01:19 AM
I'll need one for a 600H and 900H.
If they use the same sleeve, then why are the insert kits different?
The main gear is much larger on the 900H. My 600H kit uses carbon fiber washers slightly smaller than my 114h kits, but the 900H uses the same washers from the 10/0 and up senator kits. The gear is pretty shallow in both the 600H and 900H, so they are limited to a 3 or 5 stack depending on the washers thickness.
I'll take one 910h kit.
Quote from: RowdyW on September 15, 2018, 12:04:14 AM
Main gear size is different. ;D
Makes sense. I've been through a few of these, but am not familiar as much as a penn.
Thanks Rudy and Adam. ;)
Two 113h ... Jeff
Hi Adam,
Can I add a 349h kit to my order please, if it's not too late? If so, I'll wait for next round, thanks! Darin
Quote from: Darin Crofton on September 15, 2018, 01:36:06 PM
Hi Adam,
Can I add a 349h kit to my order please, if it's not too late? If so, I'll wait for next round, thanks! Darin
You got it.
All of the 113H kits, all of the 349H kits, and most of the Daiwa kits should be ready to ship around the middle of next week. Ill send out PM's this weekend with payment info.
Quote from: Three se7ens on September 15, 2018, 10:21:33 PM
Quote from: Darin Crofton on September 15, 2018, 01:36:06 PM
Hi Adam,
Can I add a 349h kit to my order please, if it's not too late? If so, I'll wait for next round, thanks! Darin
You got it.
All of the 113H kits, all of the 349H kits, and most of the Daiwa kits should be ready to ship around the middle of next week. Ill send out PM's this weekend with payment info.
Awesome, you rock!
Adam, I'll take
1 - 113H - and 1-114H/115 - insert kit
plus a couple of stars and handles
Thanks Peter
Hi Adam, i'd like a 349h kit if you have one. also would like 1 or 2 titanium stars if available. thanks, Steve
Hello,
If available, I would like two insert kits for the 114H and two offset handles for the same.
I would also like two offset handles for 113H.
I plan on using the Smoothdrag T-bar knobs - is that enough to go on - or are there different sizes.
Thanks, Steven Roy
please put me on the list for: 2- Penn 349 drag-insert kits. I'd also like 2-insert kits for Penn 114H reels; and, 1-inset kit for a Penn 113H. If you have the offset handles I'd like one foreach reel: ( 2 for a 349, 2 for the 114 and 1 for the 113 )
Thanks!
Hi Adam,
Thanks for all the kits you sent me, they're a work of art brother!
Do you have anymore 349h kits? I'll need one more when you do.
Also, I'm purchasing a 10/0 Tuesday and would like to know if
you make a kit for it? If so, I'd like to purchase one of those as well.
Will need handles/stars for 112h, 113h, 600h & 900h as well.
Thank you for all you do to keep us in top shape!
Darin
Ps need a kit for 114h & 970 too, thx!
The main gear is much larger on the 900H. My 600H kit uses carbon fiber washers slightly smaller than my 114h kits, but the 900H uses the same washers from the 10/0 and up senator kits. The gear is pretty shallow in both the 600H and 900H, so they are limited to a 3 or 5 stack depending on the washers thickness.
[/quote]
Hi Adam
So when ordering the insert for the 600H or the 900H, do I need to specify if I want the 3 stack or the 5 stack for you to include the thick or the thin washers?
João
Quote from: Joao Tavares on October 15, 2018, 08:38:38 AM
The main gear is much larger on the 900H. My 600H kit uses carbon fiber washers slightly smaller than my 114h kits, but the 900H uses the same washers from the 10/0 and up senator kits. The gear is pretty shallow in both the 600H and 900H, so they are limited to a 3 or 5 stack depending on the washers thickness.
Hi Adam
So when ordering the insert for the 600H or the 900H, do I need to specify if I want the 3 stack or the 5 stack for you to include the thick or the thin washers?
João
[/quote]
The 600H kit uses a 5 stack of smaller diameter washers. The 900H kit uses a 3 stack of larger washers.
Id swear i signed up for two 114/115 kits but dont see it anywhere so ill say again Id like to get 2 kits for 114/115
note modified to 3 kits for 9/0 in post 2/14./19
Still working on the rest of the kits. Dont worry, yours havent been lost.
Newbie to the site! I would like a set for a 115. Cant wait!
I'd like to get in on this if possible, (1) 114h kit and (2) 116l kits
Thanks!
Three 114h/115 and two 113h kits for me please, thanks.
One kit for 113H please.
Hello
If I could I would like to get on the list for two 349H drag kits please.
Thank you
Jason
Signed you a while back for 1 jigmaster insert.
joel8080
Quote from: TexasShark on October 23, 2018, 02:33:44 PM
Newbie to the site! I would like a set for a 115. Cant wait!
After realizing I have a 3-piece spool, I'll cancel my 115 order. Instead, can you put me down for a set for a Penn 12/0.
Sign me up for the 115 9/0 thanks!
Adam put me in for one 117/118 and one set of just the drag washers
If you're still taking orders I will purchase 1 set each for a 900h and 113h. Thanks.
Hi,
I am looking for 2 drag inserts for Daiwa 600h and the A/R kit for the Penn 9500 if you're still producing those kits. Please let me know when available.
Thanks!
Adam can i change my request from 2 9/0 kits to 3 9/0 kits if its possible
Its getting close now! I just picked up the drag washers for the 113H and 114H/115 kits today, and will have some ready to ship first of next week. 116+ are coming up after that, then Ill do the Daiwas and the new kits (jigmaster and 980 mag).
Hi Adam,
I'm in for 4-113H, 6-114H/115 and 2 extra sets of cf for the 113h and 2 extra cf sets for the 114H.
I'll be needing two 349H and two 970 kits as well.
Thank you, Darin
Hi Adam,
I'd like to sign up for a drag insert kit for a 12/0
Thanks,
Terry
I would like a set for my 118 & 115L2, please! Any word on when you plan to do the next production run? Thanks!
Quote from: Sharky McCatcher on March 16, 2019, 07:35:14 PM
I would like a set for my 118 & 115L2, please! Any word on when you plan to do the next production run? Thanks!
Waiting on the last of the parts for the big senator kits now, and Ill have more of the 114h/115 kits and a few of the 113H and 349H kits ready to ship next week.
Awesome! Is it too late for me to get in on a set for the 115L2 this week? I've got a Cortez frame & side plates and I'm looking to turn up the drag! Thanks a lot!
No need to worry about being late. I do plan on keeping these in stock once all of the requests are filled.
would like 1 or 2 349H kits when available. thanks
ADAM
when do you plan on shipping to original list ?