Hi all,
What's a good puller for removing stuck bearings out of stainless Newell bearing cups?
Go to the Alan Tani home page and do a search for bearing puller. There is a bunch of them. Sometimes you don't need more than a piece of wire with a small bend at the end. Be careful about pulling too hard on the inner race because you can warp the cage and ruin the bearing.
Also, look for a you tube video about removing a stuck bearing with toilet paper.
-steve
Thanks, Steve.
Does the paper trick work on a bearing stuck in the cam follower?
Nick
Quote from: ReelFishingProblems on March 31, 2018, 03:58:20 PM
Does the paper trick work on a bearing stuck in the cam follower?
Nick
You should be able to push it out from the other side.
this my latest "investment" and pulls bearings with 5-9mm ID
Where did you find one of those. I have a bunch of bearing cups with stuck bearings. Thanks
You can send them to me. Ill pull them out and send them back.
Keith
There is also the old trick of cutting a slot in the cap and through the bearing to be able to use a screw driver to crank the bearing out. Be careful with the cup and you can reuse.
It seems like the ones in accurate side plates have a little punched mark in them like they did it so the bearing wouldn't fall out. I can get most of them out of Newell plates pretty easy but not in the old accurates
Quote from: Wolli on March 31, 2018, 11:53:45 PM
this my latest "investment" and pulls bearings with 5-9mm ID
https://de.gedore.com/fileadmin/Kataloge/DE/Katalog_2017/3001113_kat_ged_gwf_en_17_screen.pdf
is the full catalogue, page 480, but it seems the min ID is 5mm.
Quote from: Wolli on March 31, 2018, 11:53:45 PM
this my latest "investment" and pulls bearings with 5-9mm ID
Looks good to me so I just bought one.
Curious design though. The jaws are forced to expand remotely by pressure within the central chamber from a bearing ball.
A little different to the Reelspeed pullers but more adaptable within it's size range and can extend your puller range up to 8+mm.
I was actually talking to Chris (Rothmar) about getting him to fabricate a larger one so just what I was looking for.
Hope it performs well.
Thanks Wolli.
~
Quote from: Wolli on March 31, 2018, 11:53:45 PM
this my latest "investment" and pulls bearings with 5-9mm ID
how did you ordered one?
Quote from: steelfish on April 18, 2018, 01:44:22 AM
how did you ordered one?
There going on eBay (UK I think)
~
The Gedore puller arrived today.
I adapted the hammer from the Reel Speed puller which was a convenient neat fit.
You can see how the spread is actuated by a plunger far back in the jaws.
This design is not as secure a fit as the Reel Speed puller but hopefully it will be strong enough.
Now to wait for a suitable candidate to give it a maiden test drive :)
Found another like tool:
https://www.ebay.com.au/itm/282494346357
Also comes in a set covering all sizes, and looks like the set would cover you for seals , pilot bearings/bushes and such
In Australia no less!
Better price & better postage!
Just when I bought mine of course!
Here a more better size:
5 to 8.5mm Internal Extractor for #9630 5Pc. Internal Be T&E Tools 9630-5
https://www.ebay.com.au/itm/5-to-8-5mm-Internal-Extractor-for-9630-5Pc-Internal-Be-T-E-Tools-9630-5/252958567251?hash=item3ae5816b53:g:~1wAAOSwZrhaUw~6
~
Quote from: exp2000 on April 21, 2018, 04:34:15 AM
In Australia no less!
Better price & better postage!
Just when I bought mine of course!
Here a more better size:
5 to 8.5mm Internal Extractor for #9630 5Pc. Internal Be T&E Tools 9630-5
https://www.ebay.com.au/itm/5-to-8-5mm-Internal-Extractor-for-9630-5Pc-Internal-Be-T-E-Tools-9630-5/252958567251?hash=item3ae5816b53:g:~1wAAOSwZrhaUw~6
~
Yep, usually my luck as well, except this time! ::)
Well I found the perfect test for my new bearing puller and I couldn't be more happy :D
How does the build quality feel/expected longevity? Wish I could luck into a set of the reelspeed pullers but this looks like the next best thing out there.
Quote from: bpm2000 on June 12, 2018, 08:41:57 PM
How does the build quality feel/expected longevity? Wish I could luck into a set of the reelspeed pullers but this looks like the next best thing out there.
It's German made so not cheap crap.
Based on the design, I had my reservations but so far so good.
The acid test will be trying to extract a bearing firmly rusted inside a metal recess.
It does have one advantage over the larger Reel Speed Puller though, The reel Speed pullers are imperial sizes so not a good match for metric bearings in the larger sizes.
The Gedore puller has an infinitely adjustable range from 5 to 9mm. If someone were to manufacture an effective smaller version say from 3 to 5 mm it would be one handy tool.
~