update for 2015 - i've pretty much switched over to paypal for everything. i started having too many guys flake on me.
there are some specialty parts, mostly custom handles, that you can only order from me. to find out if something is available, send me a pm on this or any of the other boards, or send me an e-mail at alantani@yahoo.com. if you see something on the "for sale board," then it is definitely available. mail a check to 12362 ted court, saratoga, ca 95070 and include a note as to item that you want and i will ship it out to you. i have paypal but i'm not that fond of it. it's mostly for the few overseas orders that i get. thanks! alan
Quote from: alantani on December 11, 2008, 06:41:58 AM
there are some specialty parts, mostly custom handles, that you can only order from me. to find out if something is available, send me a pm on this or any of the other boards, or send me an e-mail at alantani@yahoo.com. if you see something on the "for sale board," then it is definitely available. mail a check to 12362 ted court, saratoga, ca 95070 and include a note as to item that you want and i will ship it out to you. i have paypal but i'm not that fond of it. it's mostly for the few overseas orders that i get. thanks! alan
Alan, I have a newell S332-5 that needs a bearing adjustment screw for the left side (spool tension). Do you happen to have them? I have tried several people but no luck. I just need the screw and that's it. If you can help me with this, I'd greatly appreciate it.
HH1
Hello H,
If Alan is unable to help you with the Newell part perhaps I can. I have gotten a few parts from Newell for other forum members as Newell is down the street from where I live. Send me a pm and I will see if they have the part available for you.
Panama
Do you have a Shimano Core 50mg7 left side plate. The part number is BNT4065. I need a screw for my Shimano Core 50mg7 also. The part number for the screw is BNT4044. THANKS let me know!
Hi i would like to inquire if you sell replacement anti reverse bearing (arb) for jigging master power spell pe7 reel? Waiting for your reply. Thank you.
i do have some, but i would need dimensions. you can also get some from http://www.bocabearings.com/bearing-types/one-way-bearings
Hi Alan interested in stainless gear sleeves for a penn113h want to know price for 2 sleeves and price for shipping to hawaii
Thanks
Eric
Aloha Eric. E komo mai
5 Oceans 7 Seas may have a couple in stock if you live on Oahu. Try give Lois a call.
Bryan
Quote from: Bryan Young on July 24, 2013, 05:34:24 AM
Aloha Eric. E komo mai
5 Oceans 7 Seas may have a couple in stock if you live on Oahu. Try give Lois a call.
Bryan
Shoots Bryan I work down the road from them I going call tomorrow
Mahaloz
If she no more, have her call me and ill get more out to her.
Bryan
Just make sure you talk to her. All the guys at the shop are great but she has reel parts stuffed EVERYWHERE, with a system that only she knows. So if she's not there it is doubtful they can help, she doesn't work Saturdays.
Ron
Alan, I am in need of the drag washer upgrade for a Diawa Sealine 900H...
Shipping address:
Ricks Reel Service
16032 Stur St
Masaryktown, Fl 34604
Thanks!
more drag washers were ordered yesterday. i will send you a set as soon as they arrive. thanks! alan
Hi Alan
Are the kits you spoke of regarding the Jigmaster 500 available?
i am now putting together "kits" with the stainless gear sleeve, a stainless retaining pin, a drag washer to go under the main gear, and one of keta's stainless steel dogs. the kit is $5 more than the price of the gear sleeve alone. shipping is $2.
I live in Australia and would like 2 kits plus a few extra s/s dogs if possible..(reels are the current made in china models)
Cheers
Ant
can do! send an e-mail or pm with your address and i will send them out. thanks! alan
Hey Alan, I have a newer torium 20 and want to know all the recommendations for necessary upgrades to this reel. I use it on a 5' pen torque jig rod for jigging in the gom out of Venice, la. Lots of big amberjack, snapper, grouper, blackfin, and schooly yellowfin. This is my first conventional jigging setup and hope it can last me a couple seasons till I can upgrade to something beefier. I have 2 Saragossa 180000's on trevalas for spin jig setup that work well for the tough aj's etc but am becoming more partial to conventional jigging. This torium has held up well this winter but want to upgrade before I get into something too big and destroy it! Any help is greatly appreciated!
Hi Alan,
I am looking for bearing cups for Accurate sideplates for the Penn Squidder. They are just like the Newell bearing cups except the threads are not as long but they appear to be the same thread size. Let me know if you have anything that will work.
Thanks Paul
sorry, no. i wish i had a hundred. these will be nearly impossible to find. :-\
i have a shakespeare gx235 reel used about 4-5 times and would like to keep as a spare. broke main brass gear as nut was stuck and twisted off. how can I get a new part
Quote from: stxsalt on August 31, 2014, 03:41:14 PM
i have a shakespeare gx235 reel used about 4-5 times and would like to keep as a spare. broke main brass gear as nut was stuck and twisted off. how can I get a new part
these guys.....
QuoteReel Service & Warranty
Shakespeare® warrants to the original purchaser that its rods are free from defects in materials or workmanship for a period of one (1) year from the date of purchase. Shakespeare® is not responsible for normal wear and tear, nor failures caused by accidents, abuse, alteration, modification, misuse or improper care.
We would like to help you maintain your Shakespeare® reel so that you may continue to fish with confidence. If you have an issue with your reel that requires service we suggest that you send it to one of our Shakespeare® Factory Service Centers for evaluation by a trained technician.
In the U.S.
Shakespeare® Customer Service
1900 18th Street
Spirit Lake, IA 51360
(800) 466-5643
In Canada
Mike's Tackle Repair
#108-31060 Peardonville Rd.
Abbotsford, BC V2T 6K5
(604) 855-1119
Rockey's Tackle Repair
10 Brammer Drive
Orilla, ON L3V 7T4
(705) 325-3526
To help us best service your reel, please print out and complete a Reel Repair/Replacement Form. Include the completed form, plus a check or money order payable to Pure Fishing for $6.75 handling and return shipping with your reel when you send it in for repair. If you are requesting repair under warranty, please also send a copy of your dated receipt. Package your reel carefully to avoid damage. We suggest sending your reel via UPS, FedEx or insured mail and recording your tracking number.
updated......
Hi Alan ,
Working on tld s15/30, got bearing ,carbontex from dawn, I also got one of her handle blanks, it is swept design, would your shimano knob fit? Not the t type, or any suggestions, Also, is there a better bearing cap , rt side?
Here is handle blank I got
looks good! for the most part, leave the tld star as is. you've done the drags and bearings. after that, it's just the handle. go with what ever fits!
Do you still have the shimano rubber knob?
Also interested in bearing packer set, but not the needle adapter
Let me know , thanks
yes, but it will only work if you have a post (aka spindle). if you just have the bare arm, it will not work.
Hi Alan
I am looking for a drag lever quadrant and quadrant supports for a Beastmaster 4/0 2 speed. Mine is bent and I want to get a replacement.
yeah, that i would not have. the only thing you can do is to carefully tap your old one back into position. :-\