Hey guys Im cleaning this reel for a friend. But My porblem is I cant get the pinion bearing out of it beneath the anti reverse! I took out all 3 screws supposedly holding the bearing in place but with no such luck I cant get the bearing or the pinion out. Any advice?
Thanks,
Taylor :-[
in review of the schematics (http://www.quantumfishing.com/bps/tackleservice/zebco/productdiagram/ei_cti_20_30%20exp_420f31ee-6_.jpg), it appears that you may need to either pull it out or tap the shaft with a rubber/wooden hammer while holding the bearing. You may need to oil it down and soaking it before doing this process. Good luck.