Could someone, please, take a measure for me of the click pawl (TLD No 0051 in schematics) for the TLD25 (overall length, width, etc..)? I know that the hole is 3 mm in diameter, and the upper part is 7 mm in diameter, but I don't know the rest.
I need to make one, because it's too hard to get one here in Croatia.
Regards,
Josip
i should have these parts. if i can get your address, i can send them out. i am sending parts out to hrvoje in zagreb today.
Are you referring to the silver part?
http://www.yourfishpictures.com/data/500/medium/103_0745.JPG
I may have one. what is the part number and I'll check it when I get home tonight.
Quote from: Bryan Young on December 20, 2012, 06:38:37 PM
Are you referring to the silver part?
http://www.yourfishpictures.com/data/500/medium/103_0745.JPG
I may have one. what is the part number and I'll check it when I get home tonight.
Of course, it's the click pawl. The part number is 0051
Quote from: alantani on December 20, 2012, 05:17:37 PM
i should have these parts. if i can get your address, i can send them out. i am sending parts out to hrvoje in zagreb today.
Thank you Alan. I'll send you a PM with my address.
how about the other parts of the clicker assembly. did you need any of those?
http://fish.shimano.com/media/fishing/techdocs/en/TLD25_v1_m56577569830498887.pdf
No, I don't need anything else. The only thing missing is the click pawl
got it! i will try to get it in the mail on monday.
Great! Thank you very much!