Sir, I have one of these reels I use for jigging. And as per your advice I went ahead and replaced the drag washer with the carbontex,,,,, can't thank you enough. The drag is unbelievable now and smooth as silk. NOW, I'd like to change the orig. handle to a T-Bar handle like on the Stella's.... can you point me in the right direction as to where I can get one?
Respectfully,
Mark
Daytona Beach, FL.
i actually just had one made up. the grip is a little smaller in diameter and the spindle is skinnier. i'll get some photos up.......
Please send me a photo,,, I'm sure I'll buy one from you.... Everything I've ever gotten from you I've been 110% happy with... Standing by.....
mkharrell20@yahoo.com
Hope you found those pictures??? ::) I really want a handle ::)
george posted this.......
Quote
george.s
Newbie
Online
Posts: 2
saragosa 18000
« on: August 06, 2009, 04:32:19 PM » Quote Modify Remove Split Topic
--------------------------------------------------------------------------------
g'day Freedom Won . I have the saragosa 18000 too .you can put the 20,000 fa stella handle on it and the saragosa handle I put on my 6500 baitrunner. if you want to just fit the stella grip on the saragosa handle that will fit too just use one of the bearing from the stella.
Quote from: alantani on August 05, 2009, 12:45:57 AM
i actually just had one made up. the grip is a little smaller in diameter and the spindle is skinnier. i'll get some photos up.......
I'd love to see these and probably buy some from you,,, can you send me some pics?
mkharrell20@yahoo.com
ok, finally got the photos. the new kolekar spinning reel grip (right) has a 0.375 inch diameter spindle instead the 0.5 inch spindle found on the 2/0 (left), the 4/0 and the 6/0 kolekar grips. that way you can bolt this spinning reel grip onto a skinnier handle arm.
(http://alantani.com/gallery/1/1_13_08_09_10_03_26_2.jpeg)
(http://alantani.com/gallery/1/1_13_08_09_10_03_11_0.jpeg)
the older 2/0 kolekar grip (left) is 3.25 inches tall and 1.25 inches in diameter. the 4/0 kolekar grip (center) is 3.75 inches tall and 1.25 inches in diameter. the new spinner (right) is 3.5 inches tall and 1 inch in diameter.
(http://alantani.com/gallery/1/1_13_08_09_10_03_19_1.jpeg)
ok, they are ready to go. they are the same price as the 2/0 kolekar grip, $26 with shipping included. thanks! alan
Thanks Alan,,,, I want some,,, let me find out how many my brother wants as well.... stand by for a order........