I have a few new parts available for the Daiwa Sealine 600H, 900H, and 910 reels. Feedback is always welcome, and if you want something that not in stock, just PM me.
Handles: I have two styles of handles available, and either can be had to fit both the 600H/900H, or the 910.
http://motivefab.com/products-page/reels/offset-handle
(http://motivefab.com/wp-content/uploads/2015/03/handle-2.jpg)
http://motivefab.com/products-page/reels/sals-handles
(http://motivefab.com/wp-content/uploads/2014/09/IMG_5336.jpg)
600H insert drag kit: Ill update this with max drag numbers when I get a chance to fully test it, but based on the senator versions, this should max out around 60 lbs. As with the senators, thats far higher than really usable, but it makes the drag exceptionally smooth at a more reasonable 30 lbs.
http://motivefab.com/products-page/reels/insert-drag-kit
(http://motivefab.com/wp-content/uploads/2015/04/113h-insert.jpg)
600H second dog: Heres the second dog for double dogging the 600H. *note: not a drop in, still requires machining/dremeling the side plate.*
http://motivefab.com/products-page/reels/daiwa-600h-second-dog
(http://motivefab.com/wp-content/uploads/2015/06/600h-bridge.jpg)
Hi Adam,
Would be interested in a drag kit for my 900H.
Regards
Mark
Quote from: MFB on June 23, 2015, 04:35:42 AM
Hi Adam,
Would be interested in a drag kit for my 900H.
Regards
Mark
It's in the works.
Is the dog alternating? I can't tell.
Any chance you are doing a drag insert kit for the 50H/350H class?
Quote from: cj6530 on June 23, 2015, 12:35:28 PM
Any chance you are doing a drag insert kit for the 50H/350H class?
I'd be down for two of these
I need the handle setup for my 900h.
They can be ordered form my website. http://motivefab.com/products-page/reels
thanks
Adam
Adam, I'd like to get two insert drag kits for the 600h and one kit for a 900h if you have them? Thank you, Darin