I have a Calcutta 700 S and the push button will not pop out once pushed. I sent it to Shimano and they basically told me to buy a new one. Reel is brand new shape without a single scratch. Shoddy probuct IMO. Anyone know if these parts are available any where?
there is a kick lever that is a bear to get to. it also help to use a thicker drag washer under the main gear. that will make sure that the ratchet gear comes in solid contact with the pawl. it's a common problem. :-\
did they NOT have the parts to fix it?
I'm having the same problem. Anyone have a picture or two on how to fix this problem, I took it apart went through it and reassembled with the same problem, new to this and not sure where I have to look. It didn't look to my untrained eye that anything was broken or unattached. Thanks for any help, been a great reel otherwise. Actually been pulling the button out by hand for a few years now :o
the 700 is no fun to work on. kick lever needs to be replaced. it's spring loaded. you have to line everything up just right.
Go here http://stores.tunasreeltroubles.com/ct700s/ last item on page. It gets bent just a bit and it doesn't work.