Does anyone know the size of the pinion bearing of the Avet Hx series of reels?
I'd like to get a replacement before a tear down for a friend. Also has anyone found an angular contact bearing to replace it with? I'd like to hear 👂 some good news 📰, Thanks.🎣
HX- 6x17x6
HX Raptor - 6x19x6
Never played with contact bearings
Cheers:
Todd
Thanks for your promptness. :D Troll Slow, ;)
Avet pinion bearings are not a standard bearing they are deep grove bearings to sort of deal with side load. A standard bearing will not last and load up faster than a deep groove bearing.
And to complicate things even more, the very first HX's had a different pinion bearing than the ones that came out about a year later. Before you order bearings, you might want to measure the one you are replacing.
For this bearing I would suggest you call Avet and give them the serial number of the reel and have them send you the proper bearing.
I am using angular contact bearing in mine. They are steel and not stainless steel. As for the stock bearings you can get anywhere. All the are are standard deep Grove ball bearings. Stainless bearings are to soft and wont last long.
Mike.
As Avet is for me difficult to deal with Id rather at this time try a different bearing manufacturer for right now.... The tear down first is always a good idea,,,,,, butt sometimes you gamble and win, :P just like fishing! :-*
If a good quality replacement bearing in a personal reel is always protected with grease, its my own fault if rust sets in....... >:(
Quote from: mikeysm on January 26, 2022, 03:17:47 PM
I am using angular contact bearing in mine. They are steel and not stainless steel. As for the stock bearings you can get anywhere. All the are are standard deep Grove ball bearings. Stainless bearings are to soft and wont last long.
Mike.
Where are you sourcing them please.
Thanks
Todd
I have gotten angler compact bearings from a place called Alpine Bearing. Any local bearing supplier near you should carry them also. I put a couple in some JX's and they really didn't seem to make a difference at all for the pinion bearing
OK thanks. Good to know.
Todd
Todd, Ive found these on line, Butt have not installed one yet. So thats alll I know.
VSX Bearings, about 13 usd. Shipping another 6. Item, 706C ..... Both sides are open and I,m not sure which side faces away from the load so i,m waiting. In other ACB,s there was a pronounced shoulder on one side. These have worked well for me. Chrome Steel and not Stainless. Grease is your friend here......
Following Keta Lees recommendation another option is a Deep Groove type, and I may use it first.
Any winter trolling for kings yet? :'( Save me the heads for halibut bait! :D