The material goes to the cutter this week
Type A 500/112
(http://i54.photobucket.com/albums/g104/IGFA19Keta/Handle%20%20Arms%203-19-17/Type%20A_zpsy8rivoa4.jpg) (http://s54.photobucket.com/user/IGFA19Keta/media/Handle%20%20Arms%203-19-17/Type%20A_zpsy8rivoa4.jpg.html)
Type B 113H/349
(http://i54.photobucket.com/albums/g104/IGFA19Keta/Handle%20%20Arms%203-19-17/Type%20B_zps3rya1kv1.jpg) (http://s54.photobucket.com/user/IGFA19Keta/media/Handle%20%20Arms%203-19-17/Type%20B_zps3rya1kv1.jpg.html)
Type C 114H/115
(http://i54.photobucket.com/albums/g104/IGFA19Keta/Handle%20%20Arms%203-19-17/Type%20C_zpsxbilvmug.jpg) (http://s54.photobucket.com/user/IGFA19Keta/media/Handle%20%20Arms%203-19-17/Type%20C_zpsxbilvmug.jpg.html)
The 15-5 SS material is not the right thickness for 114H and 115 handle arms so they will come with a spacer washer.
Quote from: STRIPER LOU on March 19, 2017, 05:01:14 PM
Lee, I take it all these pictured are for the 113H?
Thanks, .. Lou
Type A is for 500/112H
Type B is for 113H/349
Type C is for 114H/115
https://www.mysticparts.com/PennParts/Handles.aspx (https://www.mysticparts.com/PennParts/Handles.aspx)
"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Lee, can I get on the list for 1 type A and 1 type B both in the longer versions?
Thanks
Trev
Quote from: TongassFisher on March 19, 2017, 05:45:46 PM
Lee, can I get on the list for 1 type A and 1 type B both in the longer versions?
Yes, I am taking orders now.
Lee, I had originally asked for 4 but if 5 are available without upsetting the apple cart, that would be great. Type B, 4.05 two holer. 3/16" hole would be great.
Thanks for making these again, its most appreciated. If you should need payment up front, please let me know.
All the best, .. Lou
Lee,
Put me down for ONE Type B - handle for my 349H reel!!!! a 2-holer if possible.
Thank you.
Wayne
Lee, I'll take 2 of the 113H, type B, 2 hole long handle. Rudy
(2) Type C 2 hole 5/16th hole for Alan's knob
Thanks!
Andy
Lee,
2 of the Type B, long arms for me, please.
Let me know what and when I owe ya. If you want me to prepay we can do that too.
Thanks for doing these again,
Dom
Hello Lee, I will take one type B two hole and one type B one hole
Thank you.
I'll take 1 type A with two holes thanks.
Lee, please:
Qty 1 - Type B - 2 Hole
/Joe
Three of Type C with 5/16" handle hole.
This is the diameter of Alan's 5/0 Kokelar Handles with the countersink.
Thanks Lee.
Quote from: Shark Hunter on March 20, 2017, 05:42:21 PM
Three of Type C with 5/16" handle hole.
This is the diameter of Alan's 5/0 Kokelar Handles with the countersink.
Thanks Lee.
One hole or 2?
I'll take one type A with two holes.
Thank you
Hello Lee,
I'd like three of each type, all single hole version.
Thanks!
Tom
Lee, I would like:
(1) B, 2 hole
(1) B, 1 hole
(1) C, 1 hole
All 3 with the 5/16" handle hole for Alan's 5/0 handle.
Thanks.
I'd be down for 2 A's and 2 B's, two hole version please.
Two type A and one type B - single hole version with 3/16 knob hole
Lee,
Can I add one more handle to my order? Can I get the shorter type A for a total of 3 handles? Sorry to complicate things.
Trev
Quote from: TongassFisher on March 21, 2017, 12:46:35 AM
Can I add one more handle to my order? Can I get the shorter type A for a total of 3 handles?
No problem.
4 Type B 2 hole handles please
Lee, I'll take 3 type C , one or two holes, it doesn't matter...whatever you have left.
Sal
I have used up all of the material I currently have, future cuttings can be made if I get orders for 15 or more.
Lee, what is your standard sized hole for the grasp? I would also like the hole for Alan's 5/0 grasps with the countersink.
Thanks!
Dom
Quote from: broadway on March 22, 2017, 07:04:49 PM
Lee, what is your standard sized hole for the grasp? I would also like the hole for Alan's 5/0 grasps with the countersink.
Thanks!
Dom
Countersunk should be 5/16"
"Standard" will be 3/16" and 5/16" but can be drilled to anything between 1/8" to 5/16".
Quote from: Keta on March 20, 2017, 05:44:26 PM
Quote from: Shark Hunter on March 20, 2017, 05:42:21 PM
Three of Type C with 5/16" handle hole.
This is the diameter of Alan's 5/0 Kokelar Handles with the countersink.
Thanks Lee.
One hole or 2?
One hole.
I'll take either. I know the quality of your work.
I like the throw of the two hole, but a single will work.
Dom,
the 5/0 Kokelar with the 5/16" countersink is where its at.
Where the Meat meets the Muscle. ;)
Once you've tried one, Nothing else will do.
At least in my book.
Thanks Bryan and Daron!
D, anything you have turned me onto has been a success so say no more....
Lee, please make mine 5/16" with the countersink for the 5/0 and I don't care if ya a 1 or 2 holer.
Thanks guys,
Dom
Quote from: El Pescador on March 19, 2017, 06:07:34 PM
Lee,
Put me down for ONE Type B - handle for my 349H reel!!!! a 2-holer if possible.
Thank you. Wayne
I see everyone is getting picky!
Well, so will I! Lee, please make my handle with a 5/16" with a countersink for Alan's 5/0 handle.
THANK YOU.
Wayne
Quote from: El Pescador on March 23, 2017, 01:38:11 PM
I see everyone is getting picky!
Lee, I think you're going to need a secretary. :)
Quote from: Decker on March 23, 2017, 01:50:57 PM
Lee, I think you're going to need a secretary. :)
Excel is helping me keep track this time.
"Standard" handle holes will be 3/16" for Type A, 5/16" for Type B and C. Let me know if anyone wants different and I will PM to confirm before drilling any to 5/16".
Lee, on my order for the 4 113H handles drill the hole to 6mm. If not possible then 3/16 will do. Rudy
Quote from: RowdyW on March 23, 2017, 02:28:50 PM
Lee, on my order for the 4 113H handles drill the hole to 6mm. If not possible then 3/16 will do. Rudy
I can order a 6mm drill bit.
Lee, I'll take two type C, double holes if any spares are around. I'm putting on Smooth Drag jumbo handles, but don't know the hole openings of them. It's replacing the standard 9/0 crank.
Quote from: Guitarfish1 on March 29, 2017, 03:43:06 PM
Lee, I'll take two type C, double holes if any spares are around. I'm putting on Smooth Drag jumbo handles, but don't know the hole openings of them. It's replacing the standard 9/0 crank.
If the first cutting goes well I will be ordering a 12"x12" sheet and make another run.
Lee, not to rush, but seems like these might be done by now? Just checking...
The cutter fits my jobs between their work, they do not cut for the public. I need to run out and remind them.
They will still need to meet Lee's specifications after cutting.
I know his craftsmanship is second to none.
I hope this venture works out for you better than the last time.
I don't want to see you lose money on such a fine product that you can provide.
I have tested these and they are the Bomb!
Thank You Lee. ;)
Thanks, guys. This is my first time ordering something from a custom run. :D :D :D Can't wait to see the finished product!
PMF (the laser cutter) manufactures commercial steam cleaners and they never realy had a slump due to the economy, they never cut back their woork force when many here cut back or folded. I will run out and see if some fish will get the job moving. The water cutter is busy with spring work for the larger farms in the area too, the last order he cut for me took 4 months.
Lee,
Whatever happened to these?
My year of "The Kidney Bolder of the Month" put me behind, it isn't even on the back burner right now but I have to start it up soon.
10-4
Lee, thanks for the update. I'm still interested but may possibly want to change my order to add some 1 position hole style's if you should go ahead with this.
Thanks and stay well, .. Lou