I am servicing 2 of the above reels. They are awkward to work on.
I posted this, with photos, on an old thread about these reels, but have not had any response
https://alantani.com/index.php?topic=32010.msg384087#msg384087
I also now have a further question, for those of you who know the reel. How do you remove the drive shaft E clip and replace it.... took me 1/2 hours fiddling! The second one I left in place :-\
Thanks
Have you look this over?
https://alantani.com/index.php?topic=301.0
i use this for e-clips and c-clips all the time.
https://www.mcmaster.com/e-clip-tools/