This cross bar can be ordered from my online store now. (www.mkt.com/pro-challenger-LLC (http://www.mkt.com/pro-challenger-LLC))
Well, here we go again. As you all know that these spacer bars are in mass production at this moment. They should be done by the end of this month.
The short bar (Polished or Unpolished) will fit the Penn 501-506-Senator 110-(49-149-349-these will require 3 pieces for each reel).
The short bar will also fit the Newell 220 and 322.
The long bar (Polished only) will fit the Penn 500-505 and 990-980
The long bar will also fit the Newell 338 and 440.
The following link is from Sal's testing on these bars with the reels.
http://alantani.com/index.php?topic=12048.0 (http://alantani.com/index.php?topic=12048.0)
I have been receiving a lot of pre-orders on these bars from many members, but I have not been able to process any of those orders.
Since I have the ETA on these bars, I will be able to start processing this order.
1 piece short cross bar for 501/506, some other Penn reels and Newell: $19.00
1 set (2 pieces) short cross bar for 501/506, some other Penn reels and Newell: $37.00
3 pieces short cross bars for 49-149, 349, some other Penn reels and Newell: $55.00
1 piece long cross bar for 500/505, some other Penn reels and Newell: $20.50
1 set (2 pieces) long cross bar for 500/505, some other Penn reels and Newell: $39.00
3 pieces long cross bars for for 500/505, some other Penn reels and Newell: $58.50
Please note that there will be $0.50 charge for each bar if PayPal invoice is required. There will be 6% sales tax on any order is shipping within FL.
The US First Class shipping service is included within the US. If any member prefers other than US First Class mailing service, please let me know, and I will add the shipping cost on the invoice.
To order, please do the following:
1.) Send email to sales@prochallenger.com
2.) Subject as "Custom stainless steel spacer bar"
3.) Order quantity on long or short bar
4.) Yours email address
5.) Your mailing address.
6.) Require PayPal invoice or not
7.) Shipping preference other than US First Class service (additional charge will be applied)
(http://i1280.photobucket.com/albums/a494/prochallenger/75d8dc9b-791f-4f69-bb7c-655521b914b2_zpsffd56f95.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/5dc4f79c-28fa-4672-a247-6572f5c0410b_zpsc0fcfd4c.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/adf2fd19-4423-4900-9113-8d5c4d1103e8_zps7e155be0.jpg)
Nice Stuff.
Nice!
Any plans for making spacer bars for the Senator 112H?
Quote from: trond_solem on November 04, 2014, 06:54:31 PM
Nice!
Any plans for making spacer bars for the Senator 112H?
No, it is not in the road map yet.
Quote from: Black Pearl on November 04, 2014, 11:19:11 PM
Quote from: trond_solem on November 04, 2014, 06:54:31 PM
Nice!
Any plans for making spacer bars for the Senator 112H?
No, it is not in the road map yet.
But they will be. You better make us some for the 970 as well, I love that reel.
I just purchased one and it arrived today with broken screws in the frame post, the seller claimed that the screws were missing ::). he's being a real you know what about it, but I decided to just let it go.
There are many nice guys out there, but unfortunately a few are nasty.
Guys, Alan C. asked me which one I like best and I'm having a hard time deciding ;D.
(http://i1101.photobucket.com/albums/g431/pescatore1/untitledbp.png) (http://s1101.photobucket.com/user/pescatore1/media/untitledbp.png.html)
As you could see, the cross bar at the top has a shiny finish, I believe that one would show small scratches than the bottom one, but it sure looks sweet. They are stainless steel and the small scratches might not be a problem, they could be buffed right out.
Please let me know which one you like, thanks!
Sal
I meant guys and gals, sorry Aiala, I always think of you and other ladies here as one of the guys ... I mean that in a good way ;) ;D
Shiny!! ;D
Shiny, it looks closer to to original, and will match up better with the chrome rings. ;D
I like SHINY bling! :D
~A~
Matte finish for me Sal. Sorry to be the party pooper. ;D
Polished to match the chrome rings.
Shiny, like you say Sal, easier to buff.
Quote from: Bryan Young on December 03, 2014, 03:25:18 PM
Polished to match the chrome rings.
I have to agree with Bryan! Shiny to match my hands! and the rings.
Wayne
I think the non-shiny looks more like Stainless, so my vote goes for the non-shiny
Marc..
Quote from: El Pescador on December 03, 2014, 03:42:58 PM
Quote from: Bryan Young on December 03, 2014, 03:25:18 PM
Polished to match the chrome rings.
I have to agree with Bryan! Shiny to match my hands! and the rings.
Wayne
Ok Wayne, looks like I really got to you when I mentioned that your hands were nice and shiny ;D. that was meant as a compliment. You're not a dummy like me, look at my hands ::)
Now back on the cross bars, Matte would match my hands, but shiny would match yours, I'm leaning towards matching your hands ;) ;D
Sal!
If you take care of your hands, I'll take care of my face!!!
You're funny!
Wayne
My vote is shiny. Offering both might be best!
Quote from: fIsHsTiiCkS on December 03, 2014, 07:58:04 PM
My vote is shiny. Offering both might be best!
That is what I am going to make in both options.
The bright ones will match most reel parts side rings etc Doug
Well, these cross bars will be in the US after X'mas.
Are you guys ready?
Yep - do the initial pre-orders still stand or should I re-order?
Thanks, Michael
Quote from: mhc on December 17, 2014, 11:14:48 AM
Yep - do the initial pre-orders still stand or should I re-order?
Thanks, Michael
Hi Michael,
Please re-send the order again.
The US First Class shipping service is included within the US. If any member prefers other than US First Class mailing service, please let me know, and I will add the shipping cost on the invoice.
To order, please do the following:
1.) Send email to sales@prochallenger.com
2.) Subject as "Custom stainless steel spacer bar"
3.) Order quantity on long or short bar
4.) Yours email address
5.) Your mailing address.
6.) Require PayPal invoice or not
7.) Shipping preference other than US First Class service (additional charge will be applied)
This cross bar can be ordered from my online store now. (www.mkt.com/pro-challenger-LLC (http://www.mkt.com/pro-challenger-LLC))
Uploaded new pictures.
(http://i1280.photobucket.com/albums/a494/prochallenger/75d8dc9b-791f-4f69-bb7c-655521b914b2_zpsffd56f95.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/5dc4f79c-28fa-4672-a247-6572f5c0410b_zpsc0fcfd4c.jpg)
(http://i1280.photobucket.com/albums/a494/prochallenger/adf2fd19-4423-4900-9113-8d5c4d1103e8_zps7e155be0.jpg)
Lookin good Alan!
I just got a polished set for my 501 project... they are spectacular! HIGHLY recommended. Thanks, Alan! 8)
~A~
Quote from: Aiala on February 12, 2015, 02:31:28 PM
I just got a polished set for my 501 project... they are spectacular! HIGHLY recommended. Thanks, Alan! 8)
~A~
Thanks, Aiala.
Please, if you ever need to purchase my products again, you can purchase from my online store at (www.mkt.com/pro-challenger-llc (http://www.mkt.com/pro-challenger-llc)). You don't have to get them from my Ebay store. It is cheaper at my online store.
Thanks,
--Alan
Alan!! Was wondering, any chance of having those without holes? I kind of like the solid bar look, not sure there's interest but I thought I would ask since I sure would get some . And I think Penn doesn't make them anymore :(
Marc..
Quote from: Marcq on February 25, 2015, 01:03:35 AM
Alan!! Was wondering, any chance of having those without holes? I kind of like the solid bar look, not sure there's interest but I thought I would ask since I sure would get some . And I think Penn doesn't make them anymore :(
Marc..
No, we did not make any solid because we wanted to cut some weight off.
Well!! If you ever come across some with birth defect I'm in for two , the 500 :)
Thanks, Marc..