Reel Repair by Alan Tani

Fishing Rods => Fishing Rods => Topic started by: nagant on March 27, 2019, 12:53:05 AM

Title: Kunnan no. CG7173 6 foot graphite spinner.
Post by: nagant on March 27, 2019, 12:53:05 AM
Never heard of this brand but really like it so far.  Should be a great walleye rod. Is the 2 piece connection factory? I'm sure it is but never seen one like it (steel pin).
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: foakes on March 27, 2019, 01:19:35 AM
Excellent rods!

They were made in Japan by the same folks who make golf club shafts.

The back-story goes that they were such high quality rods — and the company could not compete with the cheaper rods coming out of Asia — so they decided instead of cheapening their products — they would just continue to make high quality golf club shafts.

May be just a story — I don't know — however, I have heard it from (3) different fellows in the business over the past 18 years. I have had a couple of their 4-piece pack rods — and when they are assembled, you cannot tell it is not a one-piece by the action.  If anyone ever gets a chance to pick up one of these — they should...

Best,

Fred
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: nagant on March 27, 2019, 03:08:57 AM
Tried looking the company up but really gets foggy. California or south Carolina, fire at factory or just quit making them. Anyway its one of of those rods that just feels right.
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: philaroman on March 27, 2019, 03:18:11 AM
heard Kunnans were really good within their price range, but never tried
I really like spigot ferules, but never saw a steel one w/ double bumpers
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: nagant on March 27, 2019, 03:33:25 AM
I'm not sure about the connection either but found this so its right or their both fixed by the same guy :)
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: Swami805 on March 27, 2019, 04:21:09 AM
I remember those, had a good reputation, a good quality rod. A couple of my buddies had their surf rods
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: CapeFish on March 27, 2019, 07:53:01 AM
I had one, great rod, they went off the market > 30years ago??? Also heard the story of the factory burning down from the tackle shop in Johannesburg where I bought it.
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: theswimmer on March 27, 2019, 08:20:37 AM
I have a 3 wt 8 ft fly rod that was my Dads.
Quality  is way up on the scale . Very nice rod .
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: Fishy247 on March 27, 2019, 05:17:06 PM
I've got one of their saltwater boat rods. It was my very first saltwater rod. Very nice feel with a parabolic action.
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: foakes on March 27, 2019, 05:47:42 PM
Now I do recall something about a fire at the manufacturing or distribution center — and they decided to not continue with the fishing part of their business.

Too bad — these are excellent rods.  They were not inexpensive — but they were not overly expensive, IMO.

Just likely a little too much quality for the price point they were competing with.

Best,

Fred
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: Decker on March 27, 2019, 09:40:48 PM
I had a 9 foot Kunnan steelhead rod that was my favorite for casting light bucktails in the surf.  Great rod.
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: Reelmeneer on March 28, 2019, 03:24:44 PM
Kunnan, well made rods. Had a couple for carpfishing. Loved them! Very good build and quality!
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: whalebreath on April 01, 2019, 04:04:37 AM
I have three that I use for Coho-outstanding sticks.

Also used one of their big game units on a South American trip years ago it did serious duty every day and was a gem.

Now there's a company you might run across called 'Kunan' out of Taiwan IIRC not the same thing at all.
Title: Re: Kunnan no. CG7173 6 foot graphite spinner.
Post by: happyhooker on April 01, 2019, 08:36:49 PM
Yeah, a bit of an old time (like over 30 yrs.) name.  Sometimes see it spelled "Kunan".

Frank